Read Sharp AR-F12 (serv.man5) Service Manual online
4-13
CHAPTER 4 PUNCHER UNIT (OPTION) BASIC OPERATION
4) When punching ends, drive of the inlet feed motor (M9) and first feed motor (M1) on the finisher
is started, the horizontal registration motor (M2P) is operated in the reverse direction, and the
punch slide unit is returned to its home position where it comes to a stop.
punch slide unit is returned to its home position where it comes to a stop.
5) Even if paper to be punched continues to arrive, the punch slide unit returns to its home position
for each arriving sheet, and steps 1 to 4 are repeated.
Punch motor (M1P)
Inlet feed motor (M9)
First feed motor (M1)
Trailing edge detection
sensor (LED5, PTR5)
Horizontal registration sensor
(LED1 to 4, PTR1 to 4)
sensor (LED5, PTR5)
Horizontal registration sensor
(LED1 to 4, PTR1 to 4)
: Motor CW
: Motor CCW
Horizontal registration
motor (M2P)
motor (M2P)
Horizontal registration home
position sensor (PI1P)
position sensor (PI1P)
Punch home position
sensor (PI3P)
sensor (PI3P)
Figure 4-211
Click on the first or last page to see other AR-F12 (serv.man5) service manuals if exist.