Read Sharp AR-F12 (serv.man3) Service Manual online
2-16
CHAPTER 2 FINISHER UNIT BASIC OPERATION
3.
Buffer Paper Path 2
This is the paper path when copy sizes shown in Table 2-203 are stacked. A maximum of three
copies (three originals or more in the staple mode) are wrapped round the buffer roller, during which
job offset and stapling are performed on the stapling tray.
job offset and stapling are performed on the stapling tray.
Copy size
Length 182 to 232mm, and width 182 to 297mm
Typical copy examples
A4, B5, LT, (excluding transparencies and thick stock)
Table 2-203
The following shows paper delivery operation in the case of three originals in the staple mode.
1) The first copy is moved in the direction of the buffer roller.
Buffer roller
First copy
Figure 2-212
2) The first copy wraps around the buffer roller and, at the same time, the second copy arrives from
the host machine.
First copy
Second copy
Figure 2-213
Click on the first or last page to see other AR-F12 (serv.man3) service manuals if exist.