Read Sharp AR-F11 (serv.man6) Service Manual online
CHAPTER 1 GENERAL DESCRIPTION
1-2
II. SPECIFICATIONS
A.
Finisher specifications (AR-F11/F12)
1.
Basic specifications
a. General
b. Tray section
(1) Function (Mode)
* Cascade stack operation is performed according to instructions from the machine.
(2) Applicable paper
*1 Paper sizes and load height are shown below.
Type
2-tray finisher
* Stretching paper exit tray
* Stretching paper exit tray
Installation type
Floor installation, field option
Fixing method
Latch method (Fixed with brackets in the upper side of the PPC exit
side)
side)
Height adjustment
Available (+6mm, –10mm)
Distribution system
Tray shift system
* Use the standard tool. (+ screwdriver)
* Use the standard tool. (+ screwdriver)
Paper entry port height
693 ± height adjustment level from the floor surface
Simple load (Non-sort)
Paper sheets of a same size are loaded in the specified bin in the non-
sort mode.
sort mode.
Job offset load (Sort/Group)
Discharged paper bundles are shifted back and forth to sort.
Staple load
Stapling is automatically performed.
Mixed load Size mixed load
Paper sheets of different sizes are loaded in the specified bin.
(In the sort/group mode, only sheets of a same width can be loaded.)
(In the sort/group mode, only sheets of a same width can be loaded.)
Staple mixed load Paper sheets of different sizes (of a same width) are stapled and loaded
in a same bundle in the staple mode.
Size and load height [mm]
*1
Weight
Normal paper: 60 to 90 g/m²
Special paper and heavy paper: 91 to 256 g/m² (For 106 g/m² or above,
stapling cannot made.)
* Conforms to the specifications of the copier.
Special paper and heavy paper: 91 to 256 g/m² (For 106 g/m² or above,
stapling cannot made.)
* Conforms to the specifications of the copier.
Kind
Conforms to the specifications of the machine.
Click on the first or last page to see other AR-F11 (serv.man6) service manuals if exist.