Read Sharp AR-EF1 (serv.man22) Technical Bulletin online
ARE376
Sharp Electronics (UK) Ltd., Technical Services Group
Current parts
New parts
Ref
.
No.
Model
Name
Versio
n
P/G
No.
Parts code
Parts code
Price
rank
Parts name
Effectiv
e
time
!"#$%&
'()"*
$&
)+,-,#.
Note
AR-EF1
ALL
34 - 5
PSHEP4915FCZ
Z
PSHEP4915FCZ
1
AD
PS rear
mylar
mylar
2002/4
Running
change
3
<Interchange>
1. Interchangeable.
1. Interchangeable.
4. Not interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current
type.
type.
5. Interchangeable if replaced with same types of
related parts in use.
3. Current type cannot be used in place of new
type.
type.
New type can be used in place of current type.
6. Others.
Parts marked with "
" is important for maintaining the safety of the set. Be sure to replace these parts with
Specified ones for maintaining the safety and performance of the set.
2. The function was added so that the image loss area was created in network scanner
mode by enhancing the Soft SW40-6 for checking/changing the settings for simulation
66-1 software. (Except AR-P350 / P450,.)
66-1 software. (Except AR-P350 / P450,.)
When an image was sent by e-mail, a shadow of the rear edge of the original was
trransfered to the sending image. To correct this situation, the function was added so
that the image loss area was created on the rear edge of the originals before scanning.
that the image loss area was created on the rear edge of the originals before scanning.
This function is set using Simulation 66-1 (FAX software SW setup) as shown below.
(No measures in the default setting)
Simulation 66-1 Software
SW40-6
Set ”0”
(Default)
Set ”1”
Image Loss area
on the rear edge of original
None (current)
Available
(the shadow area is eliminated.)
Click on the first or last page to see other AR-EF1 (serv.man22) service manuals if exist.