Read Sharp AR-DE5 Specification online
10) Remove the cassette packing fixtures.
Pull the cassette until it stops.
Turn and remove the packing fixture which is fixing the paper pres-
sure plate inside the cassette in the direction of arrow.
sure plate inside the cassette in the direction of arrow.
11) Set the cassette side plate.
Hold the knob of the cassette side plate, slide it and set to the
position of the paper size to be used.
position of the paper size to be used.
12) Install the cassette rear edge plate.
Install the cassette rear plate to the position of the paper size to be
used.
used.
13) Set the paper.
When setting the paper, do not exceed the height of the indication
label.
label.
NOTE: To make the paper center shift adjustment and
the lead edge adjustment, insert the power plug
of the copier into the power outlet, turn on the
power switch, and perform the following
procedure.
of the copier into the power outlet, turn on the
power switch, and perform the following
procedure.
14) Perform the center shift adjustment.
Set a document on the document glass and make a copy.
*
If the image center is shifted, perform the following procedure.
1. Execute SIM 50-10 with the key operations on the copier.
2. Enter the set value with the keys on the operation panel to per-
form the center shift adjustment, make a copy again, and check
that the center is not shifted.
that the center is not shifted.
•
When the set value is increased, the image is shifted to the
rear side.
rear side.
•
When the set value is decreased, the image is shifted to the
front side.
front side.
After completion of the adjustment, press the
key to cancel the
mode.
15) Perform the lead edge adjustment.
Set a document on the document glass, and make a copy.
1. Execute SIM 50-1 with the key operations on the copier.
2. Enter the set value with the keys on the operation panel and make
a copy to check that the lead edge is within the specified range.
•
When the set value is increased, the copy image moves for-
ward.
ward.
•
When the set value is decreased, the copy image moves back-
ward.
ward.
After completion of the adjustment, press the
key to cancel the
mode.
0
5
0
1
0
[Program key]
C
Center line of image
Center line
of paper
of paper
Center line of image
Center line
of paper
of paper
CA
0
5
0
0
[Program key]
C
1
CA
– 5 –
Click on the first or last page to see other AR-DE5 service manuals if exist.