AR-DE1 (serv.man2). ARDE1-SERVICE MANUAL - Sharp Copying Equipment Service Manual (repair manual). Page 8

Insert the tray rail left into the positioning section of the frame on the
left side of the desk. Put the tray rail onto the frame and fix it with
fixing screw A (1 pc.).

Put the paper feed unit on the guide rail and push it until it stops.

Engage the front side of the paper feed unit with the positioning boss
(2 positions) of the desk frame, and fix it with the fixing screw (1 pc.).

Insert the positioning bosses (2 positions) of the tray rail right cover
into the positioning holes of the front frame on the right side of the
desk, and fix with the fixing screws A (2 pcs.).

Select the paper size according to the paper to be used.

The selecting procedure is the same as that of the main body.

Lift the both sides of the rear of the tray, fit the tray guide with the tray
rail, and push it along the tray rail into the desk.

Check that the tray moves smoothly.

Lift the both sides of the rear of the tray, fit the tray guide with the tray
rail, and push it along the tray rail into the desk.

Check that the tray moves smoothly.

Pull out the upper tray.

Fix the stopper left to the left tray rail with the fixing screw B (1 pc.).

Fix the stopper right tot he tray rail right cover.

Insert the power plug of the copier into the power outlet and turn on
the power. Perform the following procedure.

Positioning section

Fixing screw A

Tray rail left

Positioning
section

Paper feed unit

Fixing screw A

Guide rail

Positioning boss

Positioning boss

Tray rail right cover

Fixing screws A

Positioning boss

Stopper left

Fixing screw B

Left side

Right side

Stopper right

Fixing screw

3 – 6