AR-D35. Service Manual. - Sharp Copying Equipment Service Manual (repair manual). Page 4

AR-D35/D34 ADJUSTMENT

– 3 –

Set a document on the document glass and make a copy.

* If the image center is shifted, perform the following procedure.

1) Execute SIM 50-10 with the key operations on the copier.

2) Turn on the Auto indicator and the indicator of a corresponding

paper tray by Light and Dark key, Enter the set value with the keys
on the operation panel to perform the center shift adjustment, make
a copy again, and check that the center is not shifted.

• When the set value is increased, the image is shifted to the rear

side.

•  When the set value is decreased, the image is shifted to the front

side.

After completion of the adjustment, press the 

 key to cancel the

mode.

Set a document on the document glass, and make a copy.

1) Execute SIM 50-1 with the key operations on the copier.

2) Turn on the Auto indicator and the indicator of a corresponding

paper tray by Light and Dark key, Enter the set value with the keys
on the operation panel and make a copy to check that the lead edge
is within the specified range.

•  When the set value is increased, the copy image moves forward.

• When the set value is decreased, the copy image moves back-

ward.

After completion of the adjustment, press the 

 key to cancel the

mode.

C

5

0

1

0

[READ-END] key

#

Paper output direction

Front side

Printing side

Rear side

Center line of image

Center line 
of paper

Output direction

1

Leading edge

Printing side

Printing side

Output direction

Center line 
of paper

Leading edge

Center line of image

1

CA

C

5

0

0

#

1

[READ-END] key

CA