AR-CF1 (serv.man4). Saddle stitch unit basic operation - Sharp Copying Equipment Service Manual (repair manual). Page 42

Read Sharp AR-CF1 (serv.man4) Service Manual online

3-41
CHAPTER 3   SADDLE STITCH UNIT BASIC OPERATION
4.
Delivery Delay Jam
a.
By delivery sensor
The delivery sensor (PI11S) does not turn ON within a specific period of time after the paper
pushing plate top position sensor has turned ON.
Paper pushing plate top 
position sensor
Paper pushing plate top 
position sensor
Delivery sensor
Delivery sensor
Paper folding motor
Paper folding motor
T: Equivalent of 180 mm
T: Equivalent of 180 mm
Load stops
Normal
Jam
Figure 3-606
5.
Delivery Stationary Jam
a.
By vertical path paper sensor
The vertical path paper sensor (PI17S) does not turn OFF within a specific period of time (feed-
ing) after the delivery sensor (PI11S) has turned ON, i.e., the trailing edge of the stack does not leave
the vertical path paper sensor.
(PI17S)
Vertical path paper 
sensor
(PI17S)
Vertical path paper 
sensor
Normal
Jam
Delivery sensor
Delivery sensor
Paper folding motor
Paper folding motor
T: Feeding of
Paper length
-130
+ 50 mm
T: Feeding of
Paper length
-130
+ 50 mm
Note: The length 130 mm is the length of the feeding
path from the vertical path paper sensor to the
delivery paper sensor, while the length 50 mm
is a margin.
Figure 3-607
Page of 44
Display

Click on the first or last page to see other AR-CF1 (serv.man4) service manuals if exist.