Read Sharp AR-C330 (serv.man14) User Guide / Operation Manual online
1-3
CHAPTER
1
CAUTIONS
1.
Do not touch the photoconductive drums or paper transport.
Scratches or smudges on them will cause copy defects.
Scratches or smudges on them will cause copy defects.
2.
The fusing unit is extremely hot. Exercise care in this area.
3. Do not look directly at the light source. Doing so may
damage your eyes.
4.
Installation adjusters.
When moving the machine, be sure to raise the installation
adjusters. After moving the machine, lower the installation
adjusters until they reach the floor.
This copier contains fusing oil that is very slippery if leaked
on the floor. Ensure that the machine is located at level
position and take care if it is to be moved that oil leakage does
not occur.
When moving the machine, be sure to raise the installation
adjusters. After moving the machine, lower the installation
adjusters until they reach the floor.
This copier contains fusing oil that is very slippery if leaked
on the floor. Ensure that the machine is located at level
position and take care if it is to be moved that oil leakage does
not occur.
5. Do not make any modifications to this machine.
Doing so may result in personal injury or damage to the machine.
6. Since this machine is heavy, it is recommended that it be moved
by more than one person to prevent injury.
7. When connecting this machine to a computer, be sure to first turn
both the computer and the machine off.
8. Do not make copies of anything which is prohibited from copying
by law. The following items are normally prohibited from printing
by national law.
Other items may be prohibited by local law.
by national law.
Other items may be prohibited by local law.
●
Money
●
Stamps
●
Bonds
●
Stocks
●
Bank drafts
●
Checks
●
Passports
●
Driver's licences
"BATTERY DISPOSAL"
THIS PRODUCT CONTAINS A LITHIUM PRIMARY MEMORY BACK-UP BATTERY THAT MUST BE
DISPOSED OF PROPERLY. PLEASE CONTACT YOUR LOCAL SHARP DEALER OR AUTHORISED
SERVICE REPRESENTATIVE FOR ASSISTANCE IN DISPOSING OF THIS BATTERY.
DISPOSED OF PROPERLY. PLEASE CONTACT YOUR LOCAL SHARP DEALER OR AUTHORISED
SERVICE REPRESENTATIVE FOR ASSISTANCE IN DISPOSING OF THIS BATTERY.
This product utilizes tin-lead solder, and a fluorescent lamp containing a small amount of mercury.
Disposal of these materials may be regulated due to environmental considerations.
For disposal or recycling information, please contact your local authorities or the Electronics Industries
Alliance: www.eia.org
Disposal of these materials may be regulated due to environmental considerations.
For disposal or recycling information, please contact your local authorities or the Electronics Industries
Alliance: www.eia.org
GETTING STARTED
Cautions
Fusing unit
Paper transport
Lock
Release
Adjuster
Caution
This product contains a low power laser device. To ensure
continued safety do not remove any cover or attempt to gain
access to the inside of the product. Refer all servicing to
qualified personnel.
This product contains a low power laser device. To ensure
continued safety do not remove any cover or attempt to gain
access to the inside of the product. Refer all servicing to
qualified personnel.
Cautions on laser
+10 nm
Wave length
785 nm
-15 nm
Pulse times
North America: (3.4 µs ±3.4 ns)/7 mm
Europe: (5.6 µs ±5.6 ns)/7 mm
Europe: (5.6 µs ±5.6 ns)/7 mm
Output power
Max 0.55 mW
At the production line, the output power of the
scanner unit is adjusted to 0.55 MILLIWATT
PLUS 10 % and is maintained
constant by the operation of the Automatic
Power Control (APC).
scanner unit is adjusted to 0.55 MILLIWATT
PLUS 10 % and is maintained
constant by the operation of the Automatic
Power Control (APC).
Click on the first or last page to see other AR-C330 (serv.man14) service manuals if exist.