AR-C330 (serv.man14). ARC330-Operation Manual - Sharp Copying Equipment User Guide / Operation Manual. Page 2

Required in IEC-950 (EN 60 950) - Europe
 •  The equipment should be installed near an accessible socket outlet for easy disconnection.

Required in Appendix ZB of BS 7002 (En 60 950) — United Kingdom

In some areas, the "POWER" switch positions are marked "I" and "   " on the copier instead of "ON" and 
"OFF".
The symbol "   " denotes the copier is not completely de-energized but in a stand-by condition at this 
"POWER" switch position.
If your copier is so marked, please read "I" for "ON" and "     " for "OFF".

This is a class A product. In a domestic environment this product may cause radio interference in which case 
the user may be required to take adequate measures.

While every effort has been made to make this document as accurate and helpful as possible, SHARP Corporation 
makes no warranty of any kind with regard to its content. All information included herein is subject to change 
without notice. SHARP is not responsible for any loss or damages, direct or indirect, arising from or related to the 
use of this operation manual.
© Copyright SHARP Corporation 2004. All rights reserved. Reproduction, adaptation or translation without prior 
written permission is prohibited, except as allowed under copyright laws.

Microsoft®, Windows®, Windows® 95, Windows® 98, Windows® Me, Windows NT® 4.0, Windows® 2000, 
Windows® XP and Internet Explorer® are registered trademarks or trademarks of Microsoft Corporation in the 
U.S.A. and other countries.
IBM, PC/AT, and PowerPC are trademarks of International Business Machines Corporation.
Pentium is a registered trademark of Intel Corporation.
PCL is a trademark of the Hewlett-Packard Company.
Photoshop® is a registered trademark of Adobe Systems Incorporated.
Acrobat® Reader Copyright© 1987-2002 Adobe Systems Incorporated. All rights reserved.
Adobe, the Adobe logo, Acrobat, and the Acrobat logo are trademarks of Adobe Systems Incorporated.
NetWare is a registered trademark of Novell, Inc.
All other trademarks and copyrights are the property of their respective owners.

Considerable care has been taken in preparing this manual. If you have any comments or concerns about the 
manual, please contact your nearest SHARP Service Department.
This product has undergone strict quality control and inspection procedures. In the unlikely event that a defect 
or other problem is discovered, please contact your dealer or nearest SHARP Service Department.
Aside from instances provided for by law, SHARP is not responsible for failures occurring during use of the 
product or its options, or failures due to incorrect operation of the product and its options, or other failures, or 
for any damage that occurs due to use of the product.

The display screens, messages, and key names shown in the manual may differ from those on the actual 
machine due to product improvements and modifications.

The mains lead of this equipment is already fitted with a mains plug which is either a non-rewireable (moulded) or a 
rewireable type. Should the fuse need to be replaced, a BSI or ASTA approved fuse to BS1362 marked           or           and of 
the same rating as the one removed from the plug must be used.
Always refit the fuse cover after replacing the fuse on the moulded plug. Never use the plug without the fuse cover fitted.
In the unlikely event of the socket outlet in your home not being compatible with the plug supplied either cut-off the moulded 
plug (if this type is fitted) or remove by undoing the screws if a rewireable plug is fitted and fit an appropriate type observing 
the wiring code below.

DANGER: The fuse should be removed from the cut-off plug and the plug destroyed immediately and disposed of in a safe 
manner. Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet as a serious electric 
shock may occur.

To fit an appropriate plug plug the mains lead, follow the instructions below: 
IMPORTANT: The wires in this mains lead are coloured in accordance with the following code:

As the colours of the wires in this mains lead may not correspond with coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured GREEN-AND YELLOW must be connected to the terminal in the plug which is marked with the 
letter E, or by the safety earth symbol       , or coloured green or green-and-yellow.
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured black.
The wire which is coloured BROWN must be connected to the terminal which is marked with theletter L or coloured red.

If you have any doubt, consult a qualified electrician.
WARNING: THIS APPARATUS MUST BE EARTHED.