Read Sharp AR-C262M (serv.man19) User Guide / Operation Manual online
INSTALLING AND USING THE TWAIN DRIVER
22
Scanning with the TWAIN driver
The TWAIN driver (SHARP MFP TWAIN C) complies with the international TWAIN standard and can be used with
many TWAIN-compliant software applications.
The example of scanning with Imaging* in Windows 2000 is explained below. Follow the same steps to scan with
other applications in other operating systems.
many TWAIN-compliant software applications.
The example of scanning with Imaging* in Windows 2000 is explained below. Follow the same steps to scan with
other applications in other operating systems.
* Imaging is an accessory in Windows.
[Place the original and switch the machine to PC
SCAN mode]
SCAN mode]
1
Place the original on the document glass
or in the reversing automatic document
feeder.
or in the reversing automatic document
feeder.
● For information on placing the original, see page 4-
6 of "Operation Manual (for general information
and copier operation)".
and copier operation)".
● Only one side of an original can be scanned using
the SHARP TWAIN driver.
● Some versions of Windows and some software
applications may not allow multiple originals to be
scanned.
scanned.
2
Touch the [PC SCAN] key in the touch
panel.
panel.
The display will change to PC SCAN mode and the
TWAIN driver can now be used.
TWAIN driver can now be used.
[Select the device]
3
Start Imaging and select "Select Device"
from the "File" menu.
from the "File" menu.
The "Select Device" window appears.
4
Select the TWAIN driver of the machine in
the "Select Device" window and click the
"OK" button.
the "Select Device" window and click the
"OK" button.
[Open the TWAIN driver]
5
Select "Acquire Image" from the "File"
menu.
menu.
The TWAIN driver settings window appears.
[Select scan settings]
6
Select scan settings for the TWAIN driver.
When finished, click the "Preview" button.
When finished, click the "Preview" button.
An image of the original will appear in the TWAIN
driver. If the image is not satisfactory, adjust the
settings and then check the preview screen again.
driver. If the image is not satisfactory, adjust the
settings and then check the preview screen again.
NOTE
When placing the original, make sure that it is
straight.
straight.
NOTE
When you switch to PC SCAN mode,
● Operation using the operation panel is disabled,
● Operation using the operation panel is disabled,
with the exception of pressing the [CA] key and [C]
key and touching the [EXIT] key in the touch panel.
key and touching the [EXIT] key in the touch panel.
● New print jobs will not be accepted.
NOTE
The procedure for selecting the device varies by
application. See the manual or Help for the
application you are using.
application. See the manual or Help for the
application you are using.
NOTE
If a window appears prompting you to set the IP
address, set the IP address and then click the "OK"
button to close the window. (See page 21.)
address, set the IP address and then click the "OK"
button to close the window. (See page 21.)
NOTE
For information on selecting scan settings and
specifying the scanning area, click the
specifying the scanning area, click the
button to
view Help.
!whaleII_inst_ex.book 22 ページ ２００４年９月１０日 金曜日 午前８時４８分
Click on the first or last page to see other AR-C262M (serv.man19) service manuals if exist.