AR-C260 (serv.man15). (12) Rom Version Up - Sharp Copying Equipment Service Manual (repair manual). Page 12

AR-C260/C260M  ROM VERSION UP  12 - 12

(4-5)

Set the bit/sec of the port set menu to 38400, and click the
OK button to close the communication port (COM*) prop-
erty.
If 38400 cannot be set, set either of the following communi-
cation speeds.

9600/19200

5) Turn on the power of the machine. 

6) Enter the simulation 49-10 mode. (Press the EXECUTE key to

enter the download (Flash ROM writing) mode.)

7) Start the download program on the PC side by double-clicking the

Mainte.exe file. The following window is indicated.

8) Select the communication setup in the option menu, and set the

communication speed same as which is set in procedure 4).

9) Select the data file to be written.

(9-1)

Double-click the Simulation Command List folder. 

(9-2)

Double-click the Special (Whale Desk) folder.

(9-3)

Double-click the file Program Download, and the following
dialog is displayed. Click the OK button.

(9-4)

Then the following dialog is displayed. Click the START
button.

(9-5)

The file selection dialog is displayed. Select the data file to
be written, and click the Open button.

 38400