AR-C200P (serv.man12). AR-C200P Network Interface User Guide - Sharp Copying Equipment User Guide / Operation Manual. Page 94

Appendix– E-Mail Alert Function 93

The following table explains how to set up the E-Mail Alert function via
Telnet.

7: Setup SMTP
(E-Mail)

1: SMTP Transmit

Set sending E-Mail via SMTP, 
enabled or disabled.

2: SMTP Receive

Set receiving E-Mail via 
SMTP, enabled or disabled.

3: SMTP Server 

Name

Set IP address or host name 
of SMTP server.

4: SMTP Port 

Number

Set port number of SMTP.

5: E-mail Address

Set the E-Mail address used 
for [From] field in the mail 
header.

6: Reply-To 

Address

Set the E-Mail address used 
for [Reply-To] field in the mail 
header.

7: Destination 

Address 1–

11: Destination 

Address 5

1: To Address 1–5

Up to five E-Mail addresses to 
which E-Mail alerts can be 
sent.

2: Notify mode

Select how to notify 
warnings/errors via E-
Mail.When any specified 
status changes, E-Mail is sent 
immediately if "EVENT" is 
selected, or periodically if  
"PERIOD" is selected.

3: Check time (hours) Set duration (1-24 hours) to 

send E-Mail when you select 
"PERIOD" as Notify mode.