AR-C172M (serv.man28). CCE-544 Modification of waste toner box to prevent error message install transfer unit. - Sharp Copying Equipment Technical Bulletin (repair manual). Page 4

Read Sharp AR-C172M (serv.man28) Technical Bulletin online

Sharp Electronics (UK) Ltd., Document Systems Support
CCE-544
Procedure for mounting the waste toner case reinforce plate
Note) Mount the waste toner case reinforce plate on the transfer belt unit in the following procedure:
Some of the transfer belt units manufactured before and in December 2003 don’t have the screw
hole shown in Step 1. In such a case, skip Step 1 and mount the waste toner case reinforce plate in
the order of Steps 2 and 3.
1. Temporarily fasten the waste toner case reinforce plate to the frame of the transfer belt unit with the
screw M3x6 (XHBS730P06000).
2. Align the transfer belt unit with the waste toner case reinforce plate as shown in the figure below and
secure them with the screw M3x10 (XEBS730P10000).
3. Tighten the screw M3x6 (XHBS730P06000) more firmly and then fasten the waste toner case reinforce
plate to the place shown below with the M3x6 (XHBS730P06000).
Page of 4
Display

Download Sharp AR-C172M (serv.man28) Technical Bulletin