Read Sharp AR-C172M (serv.man19) User Guide / Operation Manual online
PROGRAMMING, EDITING, AND DELETING F-CODE MEMORY BOXES
6-13
6
SETTING FOR F-CODE RELAY BROADCAST MEMORY
BOXES (RECIPIENT)
BOXES (RECIPIENT)
Program the end receiving machines to which document data received in the F-code relay broadcast memory box
will be transmitted when your machine is a relay machine.
will be transmitted when your machine is a relay machine.
1
Touch the [RELAY BROADCAST] key in
step 3 of "PROGRAMMING AN F-CODE
MEMORY BOX" on pages 6-10 to 6-11 and
store a box name, sub-address, and
passcode.
step 3 of "PROGRAMMING AN F-CODE
MEMORY BOX" on pages 6-10 to 6-11 and
store a box name, sub-address, and
passcode.
2
Touch the [RECIPIENT] key.
The address selection
screen appears.
screen appears.
3
Touch the one-touch keys you wish to
include as end receiving machines.
Touch indexes and the
include as end receiving machines.
Touch indexes and the
keys as
needed.
● The selected one-touch keys are highlighted and
programmed as end receiving machines.
● If you touch an incorrect key, touch the key again to
remove the highlighting and delete the destination.
4
To check the destinations that have been
selected as end receiving machines,
touch the [ADDRESS REVIEW] key.
selected as end receiving machines,
touch the [ADDRESS REVIEW] key.
You can delete a
destination from the list of
end receiving machines by
touching it. When the
confirmation message
appears, touch the [YES]
key to confirm the deletion.
destination from the list of
end receiving machines by
touching it. When the
confirmation message
appears, touch the [YES]
key to confirm the deletion.
5
Touch the [OK] key in the screen of step 3.
You will return to the screen of step 2 and the
number of stored as end receiving machines will
appear.
number of stored as end receiving machines will
appear.
6
To exit, touch the [EXIT] key. To program
another memory box, touch the [NEXT] key.
another memory box, touch the [NEXT] key.
Touching the [EXIT] key returns you to the screen
of step 3 on page 6-10.
Touching the [NEXT] key returns you to the screen
for programming a new memory box (the screen of
step 4 on page 6-10).
of step 3 on page 6-10.
Touching the [NEXT] key returns you to the screen
for programming a new memory box (the screen of
step 4 on page 6-10).
NOTES
●
Up to 30 end receiving machines (30 one-touch keys or group keys) can be programmed. If you attempt to
program more than this number, a message will appear and programming will not be possible.
program more than this number, a message will appear and programming will not be possible.
●
Only destinations that have been programmed in auto dial keys (one-touch keys or group keys) can be selected.
If you need to include a destination that has not been programmed in an auto dial key, first program it in a one-
touch key (page 6-3) and then program the destination as an end receiving machine.
If you need to include a destination that has not been programmed in an auto dial key, first program it in a one-
touch key (page 6-3) and then program the destination as an end receiving machine.
SUB ADDRESS
BOX NAME
FAX INFORMATION
123456/987654
RECIPIENT
DIRECT ADDRESS / GROUP
SELECT ADDRESS.
A
FREQUENT USE
ABCD
EFGHI
JKLMN
OPQRST
UVWXYZ
ABC
GROUP
B
C GROUP
SHARP CORPORATION
CORPO.TPS
ADDRESS REVIEW
OPQRST
UVWXYZ
ABC
GROUP
N
ADDRESS REVIEW
ApollonII_fax_ex.book 13 ページ ２００４年９月２０日 月曜日 午後３時２４分
Click on the first or last page to see other AR-C172M (serv.man19) service manuals if exist.