Read Sharp AR-C170 (serv.man57) User Guide / Operation Manual online
IMAGE EDIT MENU
6-21
6
A3 (11" x 17") Full-bleed
In other copy modes, image loss will occur along the copy edges. When the A3 (11" x 17") FULL-BLEED function is
used, the full image of an A3 (11" x 17") size original will be copied onto A3W (12" x 18") size copy paper.
The A3 (11" x 17") FULL-BLEED function can only be used when the original is placed on the document glass. (The
reversing single pass feeder cannot be used.)
Reduction or enlargement cannot be selected with this function. If reduction or enlargement has been selected, the
copy ratio will be reset to 100% when this function is selected.
Automatic two-sided copying is not possible.
used, the full image of an A3 (11" x 17") size original will be copied onto A3W (12" x 18") size copy paper.
The A3 (11" x 17") FULL-BLEED function can only be used when the original is placed on the document glass. (The
reversing single pass feeder cannot be used.)
Reduction or enlargement cannot be selected with this function. If reduction or enlargement has been selected, the
copy ratio will be reset to 100% when this function is selected.
Automatic two-sided copying is not possible.
1
Touch the [FULL-BLEED] key on the
IMAGE EDIT menu screen.
IMAGE EDIT menu screen.
The [FULL-BLEED] key
will be highlighted to
indicate that the function
is turned on, and the full-
bleed icon (
will be highlighted to
indicate that the function
is turned on, and the full-
bleed icon (
) will
appear in the upper left
of the screen.
of the screen.
2
Touch the [OK] key on the IMAGE EDIT
menu screen.
menu screen.
Return to the SPECIAL MODES screen.
3
Touch the [OK] key on the SPECIAL
MODES screen.
MODES screen.
Return to the main screen of copy mode.
4
Load A3W (12" x 18") copy paper into the
bypass tray.
bypass tray.
Adjust the bypass guide
to A3W width before
loading the paper.
Remove any paper
remaining in the tray.
Pull out the tray
extension and wire
extension. (See page 2-
4)
to A3W width before
loading the paper.
Remove any paper
remaining in the tray.
Pull out the tray
extension and wire
extension. (See page 2-
4)
5
Touch the [PAPER SELECT] key on the
touch panel and then select the paper type
in the bypass tray.
touch panel and then select the paper type
in the bypass tray.
Touch the [PLAIN] key or the [HEAVY PAPER]
key.
If you touched the [HEAVY PAPER] key, touch the
[HEAVY PAPER1] key or the [HEAVY PAPER2]
key as appropriate for the weight of the paper you
loaded. (See step 3 on page 2-12.)
key.
If you touched the [HEAVY PAPER] key, touch the
[HEAVY PAPER1] key or the [HEAVY PAPER2]
key as appropriate for the weight of the paper you
loaded. (See step 3 on page 2-12.)
Original (A3 (11" x 17")) size
Copy (A3W (12" x 18")) size
SINGLE COLOUR
A3
FULL-BLEED
MULT
ENLA
About the steps that follow
See pages 5-7 and 5-8.
Extend the copy receptacle and then begin
copying.
See pages 5-7 and 5-8.
Extend the copy receptacle and then begin
copying.
To cancel the A3 (11 x 17) FULL-BLEED function,
touch the [FULL-BLEED] key again on the IMAGE
EDIT menu screen (step 1).
touch the [FULL-BLEED] key again on the IMAGE
EDIT menu screen (step 1).
PLAIN
PLAIN
HEAVY PAPER
TRANSPARENCY
ENVELOPE
RECYCLED
COLOUR
PLAIN
A3W
AUTO
EXPOSURE
PAPER SELECT
100
%
COPY RATIO
READY TO COPY.
0
INTERRUPT
1. A4
2. B4
3. A3
4. A4R
Apollon_general-copy_EX.book 21 ページ ２００４年６月７日 月曜日 午後１時５９分
Click on the first or last page to see other AR-C170 (serv.man57) service manuals if exist.