AR-C170 (serv.man51). Peripheral devices - Sharp Copying Equipment User Guide / Operation Manual. Page 18

Read Sharp AR-C170 (serv.man51) User Guide / Operation Manual online

20-BIN SORTER
3-18
Using the 20-bin sorter
1
Place the original in the document feeder
tray or on the document glass. (See page
4-6.)
 
2
Select copy settings as needed, including
two-sided or one-sided copy mode, paper
size select, exposure adjustment, and
copy ratio. (See chapter 5.)
3
Touch the [OUTPUT] key.
4
Touch the [SORTER] key.
5
Touch the key for the desired output
mode.
The touched key is
highlighted to indicate
that the function is
enabled.
If the original was placed
on the document glass in
step 1, non-sort mode is
automatically selected. If
the original was placed in the document feeder tray,
sort mode is automatically selected.
6
Touch the [OK] key.
7
Set the number of copies as needed and
press the [COLOUR COPY START (
)]
or [BLACK COPY START (
)] key.
If you are using the
document glass, replace
the original with the next
original and press the
[START] key. Repeat
this step following the
correct page order until
all originals have been
copied.
2-SIDED COPY
OUTPUT
READY TO COPY.
OUTPUT
SORT
GROUP
SORTER
OUTPUT
NON SORT
SORT
SORTER
GROUP
READY TO COPY.
OK
CENTRE TRAY
INTERRUPT
0
NOTES
● Maximum number of original pages
This is the maximum number of original pages that can be copied at once in sort mode or group mode.
In sort mode:
The limit is the same as the maximum number of sheets that can be held in one bin. (See *1 in
the "SORTER CAPACITY" table on page 3-16.)
In group mode: Up to 20 sheets (the same as the number of bins in the sorter).
● Maximum number of copies that can be set
The maximum number of copies that can be set in sort mode and group mode is as follows:
In sort mode:
Up to 20 copies (the same as the number of bins in the sorter)
In group mode: The number of sheets that can be held in one bin (See *2 in the "SORTER CAPACITY" table on page
3-16.)
● When "Transparency film with insert sheets" or "A3 (11" x 17") Full-bleed" is selected (these are special
functions), the copies are output in non-sort mode. Sort and group modes cannot be selected.
● To cancel a copy run, press the [CLEAR] key. Copying will stop and the number in the copy quantity display will
be reset to 0.
Apollon_general-copy_EX.book  18 ページ  2004年6月7日 月曜日 午後1時59分
Page of 24
Display

Click on the first or last page to see other AR-C170 (serv.man51) service manuals if exist.