Read Sharp AR-C170 (serv.man32) Service Manual online
AR-C170M OTHERS 15 - 1
[15] OTHERS
1. Key operator program
A. Classification of set items
The set items of the key operator program are classified into the following three levels:
∗
Some items have further lower levels (set menus).
Department management
Department management counter setup
Total quantity count
Count delete
Limitation on use quantity
Department number setup
Warning for erroneous input of
department number
department number
Inhibition of print with invalid
department number
department number
Print toner save mode (B/W)
Auto power shut off setup
Auto power shut off
Auto power shut off
Pre-heat mode setup
Key touch sound setup
Auto clear mode setup
Display language setup
Message display time setup
Document sensor use inhibition
Duplex unit use inhibition
Reverse unit use inhibition
Staple use inhibition
Paper feed desk use inhibition
Shifter use inhibition
Finisher use inhibition
Center stapling position adjustment
DF stream mode setup
Automatic paper selection setup
Resist setup
E-mail alert/status
Network scanner expansion kit
Copy mode standard condition setup
Copy print density adjustment
Rotation copy setup
Program magnification ratio setup
Binding margin standard value setup
Edge erase width standard value setup
Copy quantity upper limit setup
Copy quantity upper limit setup
Color balance standard condition setup
Automatic color calibration
Copy inhibition at warning of size/direction
Recorded copy condition rewrite inhibition
Manual feed tray use inhibition in duplex copy
Cover mode use inhibition
Automatic paper selection inhibition
Serial No. display
Function setup
Inhibition setup
Printer setup
For the following items, refer to each Operation Manual.
Network scanner setup
Printer Operation Manual
Network Scanner Operation Manual
Energy saving setup
Operation setup
Device setup
List/Report print
Key operator code change
Product key input
Copy setup
Third level
Second level
First level
Key operator
code input
code input
Copy toner save mode (B/W)
Large capacity tray use inhibition
Sorter use inhibition
Key operation setup
Color mode use inhibition
Document feeder high image quality in
black/white copy
black/white copy
Time-out time setting
Cancel of limitation on sorter bin paper exit
quantity
quantity
AR-C170M OTHERS 15 - 2
2. Special tools
No
Name Part
code Purpose
Note
1
SIT chart (CCD gamma
adjustment chart)
adjustment chart)
UKOG-0280FCZZ
Used to correct CCD gamma
characteristics.
characteristics.
2
Service color test chart
UKOG-0283FCZZ
Used to check color copy quality.
3
Gray scale chart
UKOG-0162FCZZ
Used to check copy density.
4
Service color test chart for printer
UKOG-0305FCZZ
New
5
Image density sensor adjustment
jig
jig
CPLTM6305FC01
Used to adjust the image density
sensor. (Plate with calibration sheet)
sensor. (Plate with calibration sheet)
New
TLABZ4843FCZZ
Calibration sheet
New (for replacement)
6
Extension cable for measure
high voltage
high voltage
DHAi-3471FCZZ
Used to check the MC grid and DV
bias voltage (Color)
bias voltage (Color)
New
7
DHAi-3472FCZZ
Used to check the MC grid and DV
bias voltage (Black)
bias voltage (Black)
New
8
Starting powder
UKOG-0123FCZZ
Used to reduce friction between the
transfer belt and the transfer belt
cleaning blade.
transfer belt and the transfer belt
cleaning blade.
9
Cleaning cloth
UKOG-0289FCZZ
Used to clean the optical system.
Wash to reuse.
Wash to reuse.
10
Level converter
UKOG-0002QSZZ
(with serial cable)
(with serial cable)
Used to download the FLASH ROM
program from a PC to the FLASH
ROM on the machine.
program from a PC to the FLASH
ROM on the machine.
Commercially available serial
cable can be used.
cable can be used.
UKOG-0003QSZZ
(without serial cable)
(without serial cable)
11
FLASH ROM download program
file
file
Mainte_xxxx.exe
Download (upgrade) the FLASH
ROM program for main body section
ROM program for main body section
12
WDskxxx_d.pgm
Download (upgrade) the FLASH
ROM program for Desk unit
ROM program for Desk unit
13
Spare FLASH ROM
FLASH ROM (16Mbit x 2) 1pc
The type (capacity) of Flash
ROM is determined depending
on the kind of Flash ROM (in the
PCU PWB, in the ICU PWB,
Printer control PWB or in the
operation control PWB).
ROM is determined depending
on the kind of Flash ROM (in the
PCU PWB, in the ICU PWB,
Printer control PWB or in the
operation control PWB).
14
FLASH ROM (16Mbit) 1pc
15
FLASH ROM (8Mbit) 2pcs
16
FLASH ROM (32Mbit x 2) 2pcs
17
Magnifying glass
Picture quality check (Mainly the
color registration is checked.)
color registration is checked.)
Purchase a commercially
available one. (Magnification
ratio:20 - 25)
available one. (Magnification
ratio:20 - 25)
Memo
Memo