AR-C170 (serv.man24). Descriptions of each section - Sharp Copying Equipment Service Manual (repair manual). Page 13

AR-C170M  DESCRIPTIONS OF EACH SECTION  7 - 13

1) Remove the transfer unit from the machine.

2) Remove the connector and the screw, and remove the belt

drive unit.

3) Remove the transfer belt.

4) Disengage the pawl, and remove the bearing and the transfer

roller.

Note for assembly:

There are two different transfer roller bearings: black and white.
The black bearing is conductive, and must be attached to the elec-
trode side (rear frame side).

1) Remove the transfer unit from the machine.

2) Remove the connector and the screw, and remove the belt

drive unit.

3) Remove the transfer belt.

4) Remove the E-ring and the bearing, and remove the transfer

drive roller.

1) Remove the transfer unit from the machine.

2) Remove the connector and the screw, and remove the belt

drive unit.

3) Remove the transfer belt.

4) Remove the E-ring and the bearing, and remove the transfer

follower roller.

1) Remove the transfer unit from the machine.

2) Remove the connector and the screw, and remove the belt

drive unit.

3) Remove the waste toner tank unit.

4) Remove the screw, and remove the transfer cleaning blade.

1) Remove the transfer unit from the machine.

2) Remove the connector and the screw, and remove the belt

drive unit.

3) Remove the waste toner tank unit.

4) Press the cleaning lever in the arrow direction A, extend the

pawl in the arrow direction B, and pull up the cleaning lever in
the arrow direction C.

5) Remove the transfer belt cleaning roller.

Front

Conductive

Rear