Read Sharp AR-C150 (serv.man9) FAQ online
BEAR FIRMWARE REVISION
July 2004
AR-C160N
Pre April 2003 Production Only
ICU
OPE
PCU
PCU
Sub
Revision Made
3.01 3.01 3.02 3.00
• Corrects H4 trouble code.
3.02
• Copy Image Quality is improved. (The image was
reddened when the colour balance was automatically
adjusted, but the redness is reduced.)
adjusted, but the redness is reduced.)
3.03 3.04d
3.01
• To correct the copy lamp staying on when certain
trouble codes appeared during the pre-lighting
process.
process.
• Added the switching of the transport bed operation
between Colour and Monochrome pages when
printing.
printing.
3.04
• To prevent background appearing if a copy job is
restarted when the transfer belt setting within
“Custom Settings” is set to Monochrome.
“Custom Settings” is set to Monochrome.
3.05
• The margin for H4 trouble is enhanced.
3.05
• To correct U2-30 trouble after experiencing E7-10 or
E7-11 shading correction errors (power off cycle
timing changed).
timing changed).
3.06
• In extreme circumstances, if both Pre Heat and
Sleep timers are set identical, it was possible for the
Main Chargers to turn on.
Main Chargers to turn on.
3.06 3.03
3.08
• Support for both AR-DW1 & AR-DW1N.
• Added Heavy Paper Mode to Tray 3/4
• The default setting of the special size function within
• Added Heavy Paper Mode to Tray 3/4
• The default setting of the special size function within
"Custom Settings" has been changed to the
minimum size.
minimum size.
• Changed the restricted use of 2 in 1 mode with
center deletion mode.
• CPT function is now added for scanning mode.
3.09
• Amend the DV Correction table to correct magenta &
cyan toner drop in low humidity conditions.
3.10
• Corrects incorrect counting when using a card
counter audit device.
3.13
• Supports AR-C19LD9 developer with AR-DW1N only
(cyan & magenta toner drop prevention).
Click on the first or last page to see other AR-C150 (serv.man9) service manuals if exist.