Read Sharp AR-C150 (serv.man7) User Guide / Operation Manual online
1-3
CHAPTER
1
CAUTIONS
1.
Do not touch the photoconductive drums or paper transport.
Scratches or smudges on them will cause dirty copies.
Scratches or smudges on them will cause dirty copies.
2.
The fusing unit is extremely hot. Exercise care in this area.
3. Do not look directly at the light source. Doing so may
damage your eyes.
4.
Installation adjusters.
When moving the machine, be sure to raise the installation
adjusters. After moving the machine, lower the installation
adjusters until they reach the floor.
This copier contains fusing oil that is very slippery if leaked
on the floor. Ensure that the machine is located at level
position and exercise sufficient care at the time of
transportation not to incur the leakage.
When moving the machine, be sure to raise the installation
adjusters. After moving the machine, lower the installation
adjusters until they reach the floor.
This copier contains fusing oil that is very slippery if leaked
on the floor. Ensure that the machine is located at level
position and exercise sufficient care at the time of
transportation not to incur the leakage.
5. This copier is equipped with a forgery prevention feature. If an
original is used whose image closely resembles that of bank
notes, then copying may not be performed correctly.
notes, then copying may not be performed correctly.
GETTING STARTED
Cautions
Fusing unit
Paper transport
Lock
Release
Adjuster
Caution
This product contains a low power laser device. To
ensure continued safety do not remove any cover or
attempt to gain access to the inside of the product. Refer
all servicing to qualified personnel.
This product contains a low power laser device. To
ensure continued safety do not remove any cover or
attempt to gain access to the inside of the product. Refer
all servicing to qualified personnel.
Cautions on laser
+10 nm
Wave length
785 nm
-15 nm
Pulse times
North America: (4.374 µs ±4.4 ns)/7 mm
Europe: (5.732 µs ±5.7 ns)/7 mm
Europe: (5.732 µs ±5.7 ns)/7 mm
Output power
0.25 - 0.45 mW
Click on the first or last page to see other AR-C150 (serv.man7) service manuals if exist.