Read Sharp AR-C150 (serv.man59) Technical Bulletin online
CCE064
Sharp Electronics (UK) Ltd., Technical Services Group
[Correction Method for the Snake Path of the Transfer Belt].
The position of the transfer belt is controlled by the bead attached to the underside of the transfer belt. However,
depending on the conditions of the installation surface, subtle warping or strains can occur, causing the transfer
belt to snake in either the front or rear direction.
depending on the conditions of the installation surface, subtle warping or strains can occur, causing the transfer
belt to snake in either the front or rear direction.
Rotation control plate F (Inscribed with an "N").
Confirmation and adjustment of the snaking direction of the transfer belt.
Sim. 25-1 should first be carried out. After rotating the transfer belt for a specified period of time, the side-
slipping of the belt should be checked.
* It is also possible to check the initial conditions during installation operations using Sim. 25-2.
slipping of the belt should be checked.
* It is also possible to check the initial conditions during installation operations using Sim. 25-2.
Lowering the transfer belt to the position of the black-and-white mode, adjustments of the rotation control plate
F are carried out by loosening the adjustment screw. To change the snaking direction of the transfer belt, the
adjustment position of the rotation control plate F should be moved one unit (the initial position is Centre).
F are carried out by loosening the adjustment screw. To change the snaking direction of the transfer belt, the
adjustment position of the rotation control plate F should be moved one unit (the initial position is Centre).
<1> Carry out Sim. 25-1. (The drum and the belt motor are driven.)
The transfer belt is rotated in the black-and-white mode position. (The belt will automatically stop rotating
after 3 minutes.)
after 3 minutes.)
Click on the first or last page to see other AR-C150 (serv.man59) service manuals if exist.