Read Sharp AR-C150 (serv.man42) Technical Bulletin online
GMA050702
Sharp Electronics (UK) Ltd., Technical Services Group
Note: Reducing the value reduces the saturation in the low-density area and
the white area for each copy mode. The saturation in the high-density area is
not affected.
When adjusting Test Simulations 46-01 and 46-02, it is recommended to use both
the Sharp Colour Test Chart (UKOG-0283FCZZ) and the Sharp Grey Scale Chart
(UKOG-0162FCZZ) to adjust the low-density area
Adjust the exposure for both B/W & Colour modes as per specification:-
COLOUR MODE
Using a Sharp Colour Test Chart, adjust each exposure mode in manual exposure
position “3”, until row 7 of the colour bar chart is absent. This involves switching
from Test Simulation mode to operator mode
position “3”, until row 7 of the colour bar chart is absent. This involves switching
from Test Simulation mode to operator mode
If each exposure mode value is adjusted by a given amount, make a test copy in all
modes to confirm the copy quality and background level.
modes to confirm the copy quality and background level.
“TEST” icon.
Press “CLOSE”, to return to
operator mode. Select the
exposure mode you wish to
adjust, then return to test
command mode by pressing the
“TEST” icon.
operator mode. Select the
exposure mode you wish to
adjust, then return to test
command mode by pressing the
“TEST” icon.
Click on the first or last page to see other AR-C150 (serv.man42) service manuals if exist.