Read Sharp AR-C150 (serv.man42) Technical Bulletin online
GMA050702
Sharp Electronics (UK) Ltd., Technical Services Group
If any of the above conditions are not met, adjust the density of each colour’s gamut
by using the up and down arrows. This changes all 15 squares simultaneously.
(each colour’ “gamut” is represented by 15 squares. - Letters “A” through “O”.)
The next objective is to adjust the individual patch to get the composite black
strip (CMY mixed) to match the process black strip (Bk) as closely as possible.
1)
by using the up and down arrows. This changes all 15 squares simultaneously.
(each colour’ “gamut” is represented by 15 squares. - Letters “A” through “O”.)
The next objective is to adjust the individual patch to get the composite black
strip (CMY mixed) to match the process black strip (Bk) as closely as possible.
1)
With the first process black strip facing you, label the process black strip from
left to right, MAX, O, N, M, L, K, J, I, H, G, F, E, D, C, B, and A. (16 squares) This
will be your reference sheet.
2)
will be your reference sheet.
2)
In order to manipulate the composite black strip so it resembles the process
black strip as closely as possible, highlight the colour you wish to adjust (C, M, Y, or
K). Choose the square you wish to adjust, (letter A through O) ,use the ten keys to
increase or decrease the value, and press “OK”.
K). Choose the square you wish to adjust, (letter A through O) ,use the ten keys to
increase or decrease the value, and press “OK”.
Select Colour
to be adjusted
Either Select 1 point to adjust
1 point at a time or use the up
and down arrows to adjust all
15 points simultaneously
Click on the first or last page to see other AR-C150 (serv.man42) service manuals if exist.