Read Sharp AR-C150 (serv.man12) FAQ online
– 3 – Open the "Device manager" tab.
– 4 – Open "Port (COM/LPT)."
– 5 – Select and double-click the "communication port (COM*)"
which is used.
– 6 – Open the "Port setup" tab, and enter "115200" in the
column of bit/sec.
If the above communication speed cannot be set, select and set
one of the following speeds.
one of the following speeds.
9600/19200/38600/57600
– 7 – Close the communication speed setup menu.
7) Set the data communication speed on the machine side.
This setup must be the same as the setup on the computer side.
– 1 – Enter the simulation 49-2 mode.
– 2 – Press the communication speed key which is the same as
the set speed in procedure 8).
(The set communication speed is highlighted.)
(The set communication speed is highlighted.)
– 3 – Cancel the simulation 49-2.
8) Enter the simulation 49-1 mode, and press the EXECUTE key.
(The unit enters the download (Flash ROM writing) mode.)
9) Start the download program on the personal computer.
(Double-click Mainte_1000.exe file.)
10) Select the communication setup from the option menu.
(Set to the communication speed which is the same as the
speed set in procedure 6) and 7).
speed set in procedure 6) and 7).
Click on the first or last page to see other AR-C150 (serv.man12) service manuals if exist.