AR-810 (serv.man50). ROM upgrade ... (5) - Sharp Copying Equipment Technical Bulletin (repair manual). Page 3

Read Sharp AR-810 (serv.man50) Technical Bulletin online

AR568
Sharp Electronics (UK) Ltd., Technical Services Group
ROM Upgrading (4)
After upgrading System ROM, perform "08-690"to initialize the HDD.
If the HDD is not initialized, F10 error will occur.
1) By initializing the HDD, the following information will be erased.
Stored data by "Filing"
Stored data by "Image composition"
2) When installing AR-P15, the following information will be erased as well.
Storage Job
Private Job
User information and Template information of Private Scan
Histories of Print and Scan
From July 2003 production
ROM
System ROM UI ROM
Main ROM
Laser
ROM
Scanner
ROM
PFC ROM
RADF ROM
Version
009
009
009
13
08
08
07
03
Changed problems
1) In RADF mixed paper size mode, in the case of copying with the combination such as LT-R and
Legal (or A4-R and FOLIO) in the mixed size document mode APS, RADF controller performed
reversing a document like the reading process of a duplex document in order to detect the
document correctly so that the speed of reading a document delayed. It was corrected.
2) When discharging papers with attaching the finisher, Shift process was changed not to let
discharged copies overlap among jobs.
3) When setting the magazine sort and Nin1, the display showed wrong magnification for the selected
paper.
Therefore, it was changed to renew the magnification after inputting the document in the case that
such mode was set.
4) Glazing stripe in the image due to grease of the cleaning roller was improved.
Spec change
1) 08 codes for controlling the temperature of the pressure roller were added.
(08-844-846 were added)
2) When a sheet is not set in the manual feed tray, the icon will be gray out in fear of touching the
icon of the manual feed tray in the special menu. (In the case of using the manual feed tray, the
setting is performed after putting the sheet, therefore if there is no sheet on the tray, the manual
feed tray related setting are now cannot be changed in order to prevent the mis-operation.)
3) 08 code for canceling the input number limit of continued original icon in a copy job using RADF
was added. (In 08-333 parameter, 2 was added)
4) In the case of copying with a cassette set as for the special paper, the cassette will be out of
target of auto cassette switch.
Note) These have been included from the version combination above-mentioned or later.
Addition and change to [Service hand book] following this upgrading.
1. Change of the setting mode (08)
Setting mode (08)
Code
Name
Default
Acceptable value
Contents
Before
change
0
0^1
0:9 times  1:4 times
333
Continued original
input number of time
After
change
0
0^2
0:9 times  1:4 times  2: Unlimited
Page of 10
Display

Click on the first or last page to see other AR-810 (serv.man50) service manuals if exist.