AR-810 (serv.man24). Complete service manual - Sharp Copying Equipment Service Manual (repair manual). Page 81

Read Sharp AR-810 (serv.man24) Service Manual online

AR-651/810  CONTROL PANEL  5 - 6
No.
Message
Abnormal state and indication on display panel
Solution
15
Select the same
sized Inserter sheets
as the originals
16
Set Tab sheets in the
same direction as
the originals
17
Set Inserter sheets in
the same direction as
the originals
18
Only one paper
source can be used
with Cover Sheet
feature.
19
Only two paper
sources can be used
with Sheet Insertion
feature.
20
ADD PAPER TO
INSERTER FEEDER
21
Set the paper source
for Tab sheet
22
Cannot use OHP
23
Wait Saving form
24
Fuser cleaning web
decreased
25
Time for periodic
maintenance (Fuser
cleaning web)
26
Tab size: A4/LT only
27
Please divide and set
the documents which
is loading over
28
Service
recommended for
SPC
Displayed when the paper sizes for
inserter paper and original are different
Displayed when the paper directions for
tab paper and original are different
Displayed when the paper directions for
inserter paper and original are different
Displayed when both the cover mode and
inserter cover mode are selected
Displayed when all the sheet insertion
mode, tab insertion mode and inserter
sheet insertion mode are selected
Displayed when the inserter mode is valid
and the [START] key is pressed without
papers on the tray
Displayed when the tab paper mode is valid
and the tab cassette is not selected
Displayed when the paper is OHP and
duplex printing is carried out
Displayed during inputting the form
combination original
Displayed when the fuser unit cleaning
web gets decreased
* This message is set not to be displayed
at shipment, but the setting can be
changed at the setting mode (08-938).
Displayed when the fuser unit cleaning
web gets run out
Displayed when the tab paper mode is
valid and other than A4/LT is selected for
the tab paper size
Displayed when there are too many
originals set in the RADF
Displayed when the surface potential
control error occurs
- Select the same size for the inserter
sheets and originals.
- Set the tab sheets in the same
direction as the originals.
- Set the inserter sheets in the same
direction as the originals.
- Release either the cover mode or
inserter cover mode.
- Release any of three modes
- Release the inserter mode
- Set papers on the inserter tray
- Select the 2nd cassette property to
the tab to release this state.
- The display is released when
either the setting for OHP or for
duplex printing is released.
- The display is released when the
saving has finished.
- Replace the cleaning web.
- Replace the cleaning web.
- Select A4 or LT for tab paper.
- Remove originals from RADF.
- The condition is released when the
surface potential control has
finished normally.
Page of 127
Display

Click on the first or last page to see other AR-810 (serv.man24) service manuals if exist.