Read Sharp AR-810 (serv.man24) Service Manual online
AR-651/810 SPECIFICATIONS 1 - 6
K. Charger wire cleaning
Note: The charger wire is cleaned.
L. Special functions
Charger wire cleaning
Automatic cleaning system
Interruption
Yes
Pre-heating
Yes
Key input can be
accepted during warm-up
or ready state.
Note 1: Automatic pre-heat function can be set in the
adjustment mode.
Note 2: Time can be set in the adjustment mode.
(Setup: 15, 20, 30, 45, 60 min)
Factory setup (Note 2):
15 min
Note 3: The fusing unit temperature in pre-heating can be
changed in the adjustment mode.
Sleep
Yes (when the controller is connected)
Excluding the options and
the dump heater.
Note: The power consumption in the sleep mode is max.
20W.
Auto off
Yes (When the controller is not connected)
Note 1: Time up to off can be set in the adjustment mode or
on the adjustment menu. (Max. 240 min.)
Factory setup (Note 1):
90 min
Note 2: Use/Non-use can be selected by setup on the
adjustment mode.
Factory setup (Note 2):
Yes
Note 3: Selection of user setup allow/inhibit on time setup
can be set.
Factory setup (Note 3)
Japan, North America,
Australia: Allow
Europe: Inhibit
Auto clear
Yes
Note: Setup can be changed in the adjustment mode or on
the adjustment menu. (15 to 150sec (in increment of
15 sec))
Factory setup: 45sec
Self diag
Yes
Error code history
Yes
Department
management (pass
code function)
Yes (The number of copies and the number of prints are
managed for each department.)
Factory setup: OFF
Note 1: Entry of the pass code in 5 digits is required when
supplying the power or in auto clear for copying.
Entry of OOOO is
rejected. (Note 1)
Note 2: Common use with the key counter is inhibited.
Note 3: Max. 150 kinds can be set.
Dew prevention
Yes (Option depending on the destination)
Message Yes
Note 1: Graphic LCD, back-light provided
All clear
Yes
Mode memory
Yes (4 modes)
Inhibited in interruption
copy
Cover mode
Yes (following 4 modes)
(1) White cover mode
(2) Copy cover mode
(3) White cover/white back cover mode
(4) Copy cover/white back cover mode
Click on the first or last page to see other AR-810 (serv.man24) service manuals if exist.