Read Sharp AR-810 (serv.man19) Service Manual online
AR-651/810 EXIT/REVERSING UNIT 15 - 7
[C] Reverse sensor
(1) Disconnect 1 connector, remove 2 screws (1 for
the lower sensor) and take off the sensors.
[D] Gate solenoid
(1) Disconnect 1 connector, remove 2 screws and
take off the solenoid.
Note: When installing the solenoid, position it so that it
is flush with the edge of the mounting plate.
While the solenoid is normally mounted in the A
position, can be also be mounted in the B posi-
tion.
[E] Reverse motor
(1) Remove the exit/reverse unit.
(2) Disconnect 1 connector, remove 6 screws and
take off the reverse section drive unit.
(3) Disconnect 1 connector, remove 2 screws and
take off the reverse motor.
B
A
Connector
Connector
Reverse sensor 1
Reverse sensor 2
Click on the first or last page to see other AR-810 (serv.man19) service manuals if exist.