Read Sharp AR-810 (serv.man17) Service Manual online
AR-651/810 TRANSFER/TRANSPORT UNIT 13 - 9
[G] Transport detection sensor
(1) Remove the transfer belt and fuser unit.
(2) Disconnect 1 connector, remove 1 screw and
take off each sensor.
(H-2) Drive clutch
(1) Remove 1 E-ring and 3 screws and release the
bracket.
(2) Disconnect 1 connector and take off the drive
clutch.
Notes: 1. When installing the clutches, pay attention
to the color of harness.
2. When fitting the E-rings on the clutches, make
sure that the latches of E-ring do not
protrude on the flat part of shaft.
[H] Transport clutch
(H-1) Transport clutch 1, 2
(1) Disconnect 1 connector, remove 1 E-ring and
take off each transport clutch.
Notes: 1. When installing the clutches, pay attention
to the color of harness.
2. Make sure that the E-rings are tightly fit not
to be loosen and one end of E-ring does not
ride too much on the flat part of shaft.
E-ring
Transport clutch 1
Transport clutch 2
E-ring
Bracket
Black
Drive clutch
Click on the first or last page to see other AR-810 (serv.man17) service manuals if exist.