Read Sharp AR-810 (serv.man16) Service Manual online
AR-651/810 DEVELOPER UNIT 12 - 17
[I] Scattered toner recovery roller/Developer
sleeves (magnetic roller)
(1) Remove 3 screws and take off the front side
plate.
(2) Remove the scattered toner recovery roller.
(3) Remove 2 screws of the front side developer
sleeve holder.
(4) Remove the bearing and E-ring and take off
the gear and parallel pin.
(5) Remove 2 screws of the rear side developer
sleeve holder.
(6) Remove both the upper and lower developer
sleeves with the holders.
Front side plate
Scattered toner recovery roller
Developer sleeve holder
Bearing, E-ring,
Gear, Parallel pin
Developer sleeve holder
(7) Take off 2 pole position fixing bushings and
remove 2 E-rings.
Pole position fixing bushing
Click on the first or last page to see other AR-810 (serv.man16) service manuals if exist.