Read Sharp AR-651 Handy Guide online
Fault Finding
SHARP ELECTRONICS (UK) LTD
DOCUMENT SYSTEMS GROUP
DOCUMENT SYSTEMS GROUP
56
VERSION 1
DECEMBER 2002
Model
Fault
Advice
Comments
AR-651/810
Double imaging at installation
Cleaner blade transport screw
not removed
not removed
See page 19-4 service
manual
manual
AR-LC4
No lift of base plate with or
without paper loaded into into
LCF
without paper loaded into into
LCF
Machine/LC4 not on level
surface. LCF not latching
squarely to machine, LCF set
sensor (S7 – 5volt signal) not
made.
surface. LCF not latching
squarely to machine, LCF set
sensor (S7 – 5volt signal) not
made.
Machine and options
must be sited on level
surface
must be sited on level
surface
AR-651/8120
F 10 error code (HDD
formatting error)
formatting error)
To reset this error code use test
command 08-690 see page 3-1
service handbook
command 08-690 see page 3-1
service handbook
Power cycling the
machine will not reset this
error code
machine will not reset this
error code
AR-651/810
Error message “check paper in
LCC”
LCC”
LCF rear guide (lever-tray, p/g
item10, sec 8) broken or sensor
(s47 PR-MST-SS) is faulty
item10, sec 8) broken or sensor
(s47 PR-MST-SS) is faulty
Lever-tray part no.
0N6LA04838000
0N6LA04838000
Click on the first or last page to see other AR-651 service manuals if exist.