Read Sharp AR-651 (serv.man19) Service Manual online
AR-651/810 RADF (DOCUMENT FEEDER) 16 - 74
(B-3) ADF left cover
(1) Remove 2 screws and take off the ADF left
cover while moving it downward.
(3) Remove the clips at the pickup unit, displace
the bushings and take off the pickup unit.
Lock support
(4)
ADF left cover
(4)
(3)
ADF board
Upper guide cover
Bushing
Clip
[C] ADF board
(1) Remove 4 screws and take off the rear cover.
(2) Disconnect all 15 connectors from the board.
(3) Remove 1 screw and 2 lock supports and take
off the ADF board.
(4) Remove 2 screws, release the harness from
the clamp and take off the bracket.
Note: By disconnecting 15 connectors and removing
3 screws mentioned at the above (2), (3) and
(4), ADF board can be taken off with the bracket.
[D] Rollers
(D-1) Pickup roller/Feed roller
(1) Open the jam access cover.
(2) Remove 2 screws and take off the upper
guide cover.
Click on the first or last page to see other AR-651 (serv.man19) service manuals if exist.