AR-5132 (serv.man136). MSDS F-30721 - Sharp Copying Equipment Regulatory Data (repair manual)

ar-5132 (serv.man136) regulatory data
Model
AR-5132 (serv.man136)
Pages
3 Few pages! See other manuals at the bottom of the first or last page.
Size
43.56 KB
Type
PDF
Document
Regulatory Data
Brand
Device
Copying Equipment / MSDS F-30721
File
ar-5132-sm136.pdf
Date

Read Sharp AR-5132 (serv.man136) Regulatory Data online

MATERIAL SAFETY DATA SHEET
MSDS No. F-30721 Date Issued: 28 July 1997
Section 1. Identification of the substance / preparation and company
Model: AR-532ND1, AR-532DV1
Description: Black Developer
Supplied by: Sharp Electronics (UK) Ltd
Sherbourne House
Croxley Business Park
Watford
Herts WD1   8YE
For use with model: AR-5125, AR-5132
Information line: 01923 474013
Section 2. Composition / information on ingredients
Ingredients Proportion CAS No. OSHA PEL ACGIH TLV Other Limits
Carbon black <0.4% 1333-86-4 3.5 mg/m
3
3.5 mg/m
3
None
Polyester resin <4% 80100252-5001P Not Listed Not Listed None
Ferrite powder <97% Not Listed Not Listed None
Iron oxide 1309-37-1
Copper oxide 1317-38-0
Zinc oxide 1314-13-2
Magnesium oxide 1309-48-4
Developer is a black powder containing small amounts of toner, possessing no immediate hazard
when used as intended according to instructions supplied.
Section 4. First-aid measures
Inhalation:  Remove to fresh air, minimal irritation to respiratory tract may occur as with exposure 
to any non-toxic dust. If effects persist consult medical personnel.
Immediately flush eyes with water for 15 minutes.
Skin contact: No hazard, wash thoroughly with soap and water.
Section 5. Fire-fighting measures
The material has no unusual fire or explosion hazards, hence no special fire fighting procedure is
required. Use CO
2
, dry chemical, foam or water extinguishers.
Section 6. Accidental release measures
In case of spill or leak, sweep up or clean up with vacuum cleaner. Use of a dust mask is
recommended when handling a large quantity of developer, as with any non-toxic dust. Avoid skin
and eye contact. Keep away from drains.
(1/3)
Section 3. Hazards Identification
(1/3)
MATERIAL SAFETY DATA SHEET
MSDS No. F-30721
Date Issued: 28 July 1997
Section 7. Handling and storage
Avoid storage locations exposed to direct sunlight, high humidity or temperatures over 35 
°
C.
Install in a ventilated room and avoid inhalation as with any non-toxic dust.
Section 8. Exposure controls / personal protection
Follow the installation instructions supplied.
Section 9. Physical and chemical properties
Appearance:
Fine powder
Colour:
Black
Odour:
Odourless
Specific gravity:
about 5
Solubility in water:
Negligible
Flash point:
Not applicable
Ignition temperature:
No data available
Flammable limits:
LEL; Not applicable
UEL; Not applicable
Explosive properties:
None
Sensitivity to mechanical impact:
None
Sensitivity to static charge:
None
Section 10. Stability and reactivity
Stability:
Stable
Incompatibility (Material to avoid):
Strong acid or alkaline
Hazardous decomposition:
Phenol derivatives, carbon monoxide when heated at high temperature (>300
°
C)
Hazardous polymerisation:
Will not occur
Section 11. Toxicological information
Acute toxicity:
LD50 >5000mg/kg
LC50 >5.97mg/L 0.4hrs
Mutagenicity:
(Ames test) Negative (S.typhimurium, Escherichia coli) 
(Above toxicity data relates to the toner which is included in this developer)
Carcinogenicity:
A two-year cancer bioassay using a typical toner preparation containing carbon
black demonstrated no association between toner exposure and tumor 
development in rats.
Chronic effect:
In a study in rats of chronic inhalation exposure to a typical toner, a mild to 
moderate degree of lung fibrosis was observed in 92% of the rats in the high 
concentration (16mg/m
3
) exposure group, and a minimal to mild degree of 
fibrosis was noted in 22% of the animals in the middle (4mg/m
3
) exposure 
group, but no pulmonary change was reported in the lowest (1mg/m
3
) exposure 
group, the most relevant level to potential human exposures.
(2/3)
MATERIAL SAFETY DATA SHEET
MSDS No. F-30721
Date Issued: 28 July 1997
Section 12. Ecological information
There are no known environmentally damaging effects associated with this material as long as it is
disposed of according to the recommendations.
Section 13. Disposal considerations
Section 14. Transport information
No special treatment required, the product is not a hazardous material.
Section 15. Regulatory information
No regulations applicable.
Section 16. Other information
This developer is only intended for use in the specified model detailed in Section 1, use in other
applications is not recommended.
References: H. Muhle, B. Bellmann, O. Creutzenberg, C. Dasenbrock, H. Ernst, R. Kilpper, J.C.
MacKenzie, P. Morrow, U. Mohr, S. Takeneka and R. Mermelstein (1991) Pulmonary Response to
Toner upon Chronic Inhalation Exposure in Rats. Fundamental and Applied Toxicology 17, pp. 280-
299.
(3/3)
Page of 3
Display

Download Sharp AR-5132 (serv.man136) Regulatory Data

Here you can read online and download Sharp AR-5132 (serv.man136) Regulatory Data in PDF. AR-5132 (serv.man136) regulatory data will guide through the process and help you recover, restore, fix, disassemble and repair Sharp AR-5132 (serv.man136) Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.