AR-505 (serv.man80). No bulletin. - Sharp Copying Equipment Technical Bulletin (repair manual)

ar-505 (serv.man80) technical bulletin
Model
AR-505 (serv.man80)
Pages
2 Few pages! See other manuals at the bottom of the first or last page.
Size
96.34 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
Copying Equipment / No bulletin.
File
ar-505-sm80.pdf
Date

Read Sharp AR-505 (serv.man80) Technical Bulletin online

NIS12062000-1
Sharp Electronics (UK) Ltd., Technical Services Group
Date:
15 June 2000
Model:
AR505
Ref.:
034
Colour:
White
Page:
1 of 2
Model Name:
AR250/280/285/335/286/336/405/505/ARPB2
Overview:
F9:00 error is described as a “communication error between the ARPB2 and the ICU”.
However, there are additional conditions that might cause this error message. These
conditions are as follows:
1. When printing a large complex graphic such as an Autocad drawing.
2. After fitting a Flash ROM chip to an ARPB2 that has previously been used as an
Engine Flash ROM chip.
3. When updating the ARPB2 firmware from 1.45 directly to 3.22
4. If the PB2 Flash ROM is faulty.
5. If additional Installed RAM is faulty.
6. If the Copier Engine Firmware is not at the latest level.
Condition 1:
When printing a large complex graphic such as an Autocad drawing
Fix:
This problem has been fixed with new firmware (PRT 4.37, Boot 2.04)
Although, this new firmware has been designed for ARPB2A, it can be used on existing
ARPB2/PB2+ to resolve this issue. (You can download this firmware from ARPB2A
section of the Technical Website)
However, be sure to follow the new Flash upgrade procedure that is included with the
files.
Condition 2:
After fitting a Flash ROM chip to an ARPB2 that has previously been used as an
Engine Flash ROM chip.
Fix:
Do not use Engine Flash ROM chips on an ARPB2 printer board.
When the Engine Flash ROM is written to for the first time in an Engine it is protected.
When we try to program this Engine Flash ROM in an ARPB2, we have no way to remove
the protection. So, a data reading failure occurs and an F9:00 error results.
FIXING ARPB2 F9:00 ERROR MESSAGES
TECHNICAL BULLETIN
NIS12062000-1
Sharp Electronics (UK) Ltd., Technical Services Group
Condition 3:
When updating the ARPB2 firmware from 1.45 directly to 3.22
The first data address in a v1.45 Flash ROM is different to the first data address in a v3.22
Flash ROM. Due to this difference, when upgrading between these versions, an F9:00
occurs.
Fix:
You can overcome this problem by:
a) upgrading directly from v1.45 to v4.37(AR-PB2A),
b) upgrading from v2.21 or v2.32 to v3.22.
If you have already upgraded a Flash ROM from v1.45 to v3.22, and it is exhibiting F9:00
errors you should replace the Flash ROM and upgrade the replacement directly to v4.37.
Condition 4:
If the PB2 Flash ROM is faulty.
Fix:
Replace the ARPB2 Flash ROM.
Condition 5:
If additional Installed RAM is faulty.
Fix:
Replace the RAM and check whether F9:00 errors still occur.
Condition 6:
If the Copier Engine Firmware is not at the latest level.
Fix:
Check the Sharp Technical Website, and confirm that that the Engine firmware is at the
latest level.
Page of 2
Display

Download Sharp AR-505 (serv.man80) Technical Bulletin

Here you can read online and download Sharp AR-505 (serv.man80) Technical Bulletin in PDF. AR-505 (serv.man80) technical bulletin will guide through the process and help you recover, restore, fix, disassemble and repair Sharp AR-505 (serv.man80) Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.