Read Sharp AR-405 (serv.man32) User Guide / Operation Manual online
8-29
CHAPTER
8
KEY OPERATOR CODE NUMBER:
FACTORY SETTING
FACTORY SETTING
The following is the factory setting of the Key Operator Code
Number, which must be used to access the Key Operator
Program.
Number, which must be used to access the Key Operator
Program.
Factory setting = 00000
This number must be entered when accessing the Key
Operator Program for the first time. (See page 8-2.)
Operator Program for the first time. (See page 8-2.)
NOTE:
The Key Operator Code Number is an important security
number allowing the Key Operator to configure the copier’s
functions and auditor’s settings.
You should register your own code number — different from the
factory setting above — immediately after your copier is
installed.
The Key Operator Code Number is an important security
number allowing the Key Operator to configure the copier’s
functions and auditor’s settings.
You should register your own code number — different from the
factory setting above — immediately after your copier is
installed.
★ KEY OPERATOR
Detach this page and store it in a safe place.
✂✂✂✂✂
KEY OPERATOR’S GUIDE
Key operator code number: factory setting
Click on the first or last page to see other AR-405 (serv.man32) service manuals if exist.