AR-405 (serv.man132). Report Of Flash Memory Version Method. (WHITE) - Sharp Copying Equipment Technical Bulletin (repair manual)

ar-405 (serv.man132) technical bulletin
Model
AR-405 (serv.man132)
Pages
6
Size
107.72 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
Copying Equipment / Report Of Flash Memory Version Method. (WHITE)
File
ar-405-sm132.pdf
Date

Read Sharp AR-405 (serv.man132) Technical Bulletin online

REPORT OF FLASH MEMORY VERSION METHOD
1.Model Name:
AR280/285/335/250/286/336/405
2.General:
As we have informed you previously, the ICU PWB of the models listed above includes a
ROM writing function which enables us to carry out version upgrades of the flash memory.
The version of the utility software (which is used for upgrading flash memory) has been
upgraded from Ver.2 (FLASH2) to Ver.4 (FLASH4).
Along with this upgrade, we would like to inform you of some changes in the operating
procedures.
3.Description:
(1) The use of the function described above.
The function described above is used when carrying out version upgrade operations
on the flash memory of each PWB (product quality improvements, function improvements,
option equipment expansion operations, etc.).
(2) PWBs which include the flash memory.
ICU PWB, PCU PWB, Operation PWB
(4) Supply of ROM data for utility software (FLASH4.EXE).
Supply will be in accordance with the route described below.
ARE160
Sharp Electronics (UK) Ltd., Technical Services Group
Date:
9 September 1999
Model:
AR405
Ref:
005
Colour: White
Page:
1 of 6
TECHNICAL BULLETIN
AR280/285/335/250/286/336/405 ICU PWB ROM writer function operating procedure
1. Personal computer operating environment
• OS: Windows 95/98 (Desk-top/Note)
* If the version of the Windows 95 is OSR2 or earlier, download a patch from
Microsoft's home page, and update the ISO.VDX.
• SCSI host adapter supporting ASPI
• This function is assured with the following SCSI host adapters:
PCI:
AHA-2940 made by Adaptec
AHA-2910B made by Adaptec
PCMCIA: APA-1460 made by Adaptec
CardBus: APA-1480 made by Adaptec
ISA:
AHA-1520B made by Adaptec
AHA-1510B made by Adaptec
• Driver software:
Ver.4.57 or a higher version is required for the ASPI driver software. If the version
is lower than Ver.4.57, the newest SCSI driver software and the ASPI driver
software should be downloaded from the Adaptec Co. Web site
(http://www.adaptec.com) and installed in the PC.
• SCSI cable
• Utility Software used by the ROM writing function of the ICU PWB.
• ICU Flash ROM PWB for writing new data.
2. Procedure
[1] Confirm whether the machine can start up using the Flash ROM which has been
installed in the machine.
[2] The machine is in the Sim26-44 mode.
In this Sim26-44, set the channel (A channel) where the SCSI cable will be
connected to “1” (SC PRINTER).
* If the ARPB2 printer kit has already been used, since the channel setting has
already been completed,the above operation is not necessary. That is, the channel
where the printer kit has already been connectedautomaticallybecomes a channel
for the SCSI cable.
* If the version of the ICU ROM installed in the AR280/285/335 is 2.xx, setting the
Sim26-44 is not necessary.
[3] Turn off the power and remove the cabinet of the Copier.
• Remove the rear cabinet, the flywheel, and the shield line guide.
• Remove the glass holder right, the table glass, and the dark box cover.
• Open the front cabinet , and remove the ROM cover from the frame cover A.
• When rewrite the flash ROM, can be operate without flash ROM PWB on the
OPE PWB and PCU PWB.
*1) When the flash ROM is rewritten using the ROM writer function described above,
it is essential that the flash ROM (program) of the ICU PWB is loaded to ICU
PWB socket-1. The targeted ROM is loaded to socket-2.
ARE160
Sharp Electronics (UK) Ltd., Technical Services Group
*2) If the ICU ROM installed in the ROM Writer is version 3.xx for the AR280/285/
335 or any version for the AR250/286/336/405, the OPE and PCU ROMs
need not be installed on the machine when the program data is written to the flash
ROM, and the versions of the OPE and PCU ROMs can be upgraded separately.
If the ICU ROM installed in the ROM Writer is version 2.xx for the AR280/285/
335, the OPE and PCU ROMs should be installed on the machine when the
program data is written to the flash ROM. Therefore,be sure to upgrade the ICU
ROM version first, and then upgrade the versions of the OPE and PCU ROMs
using the upgraded ICU ROM.
[4] Using a SCSI cable, connect the PC and the SCSI connector (channel A) set in the
Sim 26-44 above. (Cable length: Max. 1m)
Connector configurations corresponding to channel A are shown below.
[5] Install the flash ROM to be written to the Dimm socket (SOCKET-2)of the ICU PWB.
(a) OPE ROM: LH28F016SUT ´ 1
(b) PCU ROM: LH28F008SUT ´ 1
(c) ICU ROM: LH28F008SUT ´ 2 (2MB)
[6] Turn on the power of the Copier.
[7] Turn on the power of the personal computer.
[8] When the personal computer is started, the Copier is recognized as the SCSI unit
by the SCSI host adapter.
* If an “Unknown Device” message is displayed in Windows, click on [Cancel] and
proceed with the operation to its completion. (The computer has recognized the
machine as an unknown device.)
[9] Copy the flash ROM writing program and the data file to be written into the flash
ROM to the same directory.
• Flash ROM writing program: FLASH4.EXE (Windows program)
• ICU program:
ICUxxxx.MOT (xxxx = Version No.)
ICU file data:
ICUxxxx.FD
(xxxx = Version No.)
• PCU program:
PCUxxxx.MOT (xxxx = Version No.)
PCU file data:
PCUxxxx.FD
(xxxx = Version No.)
• OPE program:
OPExxxx.MOT (xxxx = Version No.)
OPE file data:
OPExxxx.FD
(xxxx = Version No.)
Please note that the ROM program data (xxx.MOT) and the file data (xxx.FD)
ARE160
Sharp Electronics (UK) Ltd., Technical Services Group
provided for FLASH2 cannot be used for FLASH4.
[10]When FLASH4.EXE is executed the following display is shown.
[11]Select the type of the flash ROM to be written and click the Translate button.
Data transfer is started from the personal computer to the ICU PWB.
[12]After completionof data transfer, writing to the flash ROM is started in the ICU PWB.
[13]When writing to the flash ROM is normally completed, the following display is
shown.
ARE160
Sharp Electronics (UK) Ltd., Technical Services Group
Page of 6
Display

Download Sharp AR-405 (serv.man132) Technical Bulletin

Here you can read online and download Sharp AR-405 (serv.man132) Technical Bulletin in PDF. AR-405 (serv.man132) technical bulletin will guide through the process and help you recover, restore, fix, disassemble and repair Sharp AR-405 (serv.man132) Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.