AR-337 (serv.man10). Cougar Firmware Revision Table - Sharp Copying Equipment FAQ (repair manual). Page 2

Read Sharp AR-337 (serv.man10) FAQ online

AR507
ICU
PCU
OPE
Revision/Correction Made
Production
H1.20
H1.20
H1.20
AB Production start.
April-00
Adjusted the amount of void area (Front/Rear).
Corrected spelling in jam guidance.
Changed "Warm-Up" message on LCD after print job is interupted due to a paper misfeed.
H2.01
H2.00
H2.00
Additional counter for Network Scanning
July-00
A message is displayed when the inserted fee is short when using the coin vend option.
On the machines under the Tandem setting, when the job on the sub-machine stops, a message isĀ 
transmitted to the status monitor.
To accompany the change of CCD manufacture and E7-11 errors.
H2.30
H2.30
H2.31
Corrects Z folding and paper jams when feeding from LCC in duplex copy mode.
June-01
Alleviated POD2_NR misfeeds.
Supports Hard Disc Drive upgrade (10GB).
Changed toner control specification when returning from shut-off mode.
Added Sim 26-40 polygon motor stop mode settings.
To accompany the change of the scanner motor manufacture.
H2.40
H2.40
H2.40
Error detect timing for H5-01 has been changed. (3 to 5 successive occurrences of paper jam)
July-01
Change of handling E7-00 trouble codes (added processing feature to initialize the CPU port to avoid H3 trouble)
Information about rotating images is retained during paper out condition while printing data using the bypass tray.
AR507 PERIPHERALS
RSPF
DE7
FN3
Revision/Correction Made
Web Site
v.44
1.01
2.1A
Start of AB production.
v.45
To improve the original paper feeding performance when using duplex copying - the operation timing of the
EPROM
paper feeding motor and the pressure solenoid has been changed.
EXCHANGE
The problem of multiple copying has been corrected (M/C locked when the 2nd and after pages were jammed.
ONLY
Page of 6
Display

Click on the first or last page to see other AR-337 (serv.man10) service manuals if exist.