AR-335 (serv.man131). Report Of Flash Memory Version Method. (WHITE) - Sharp Copying Equipment Technical Bulletin (repair manual)

ar-335 (serv.man131) technical bulletin
Model
AR-335 (serv.man131)
Pages
6
Size
133.5 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
Copying Equipment / Report Of Flash Memory Version Method. (WHITE)
File
ar-335-sm131.pdf
Date

Read Sharp AR-335 (serv.man131) Technical Bulletin online

REPORT OF FLASH MEMORY VERSION METHOD
1.Model Name:
AR280/285/335/250/286/336/405
2.General:
As we informed you previously, the ICU PWB of the models listed above includes a ROM
writing function which enables us to carry out version upgrades of the flash memory. At this
time, the version of the utility software (which is used for upgrading flash memory) has
been upgraded from Ver.2 (FLASH2) to Ver.4 (FLASH4).
Along with this upgrade, we would like to inform you of some changes in the operating
procedures.
3.Description:
(1) The use of the function described above.
The function described above is used when carrying out version upgrade operations on the
flash memory of each PWB (product quality improvements, function improvements, option
equipment expansion operations, etc.).
(2) PWBs which include the flash memory.
ICU PWB, PCU PWB, Operation PWB
(4) Supply of ROM data for utility software (FLASH4.EXE).
Supply will be in accordance with the route described below.
ARE160
Sharp Electronics (UK) Ltd., Technical Services Group
Date:
15 October 1999
Model:
AR280/285/335
Ref:
045
Colour: White
Page:
1 of 6
TECHNICAL BULLETIN
AR280/285/335/250/286/336/405ICU PWB ROM writer function operatingprocedure
1. Personal computer operating environment
•
OS: Windows 95/98 (Desk-top/Note)
* If the version of the Windows 95 is OSR2 or earlier, download a patch from Microsoft's
home page, and update the ISO.VDX.
• SCSI host adapter supporting ASPI
•
This function is assured with the following SCSI host adapters:
PCI:
AHA-2940 made by Adaptec
AHA-2910B made by Adaptec
PCMCIA: APA-1460 made by Adaptec
CardBus: APA-1480 made by Adaptec
ISA:
AHA-1520B made by Adaptec
AHA-1510B made by Adaptec
•
Driver software:
Ver.4.57 or a higher version is required for the ASPI driver software. If the version is lower
than Ver.4.57, the newest SCSI driver software and the ASPI driver software should be
downloaded from the Adaptec Co. Web site (http://www.adaptec.com) and installed in the
PC.
•
SCSI cable
•
Utility Software used by the ROM writing function of the ICU PWB.
•
ICU Flash ROM PWB for writing new data.
2. Procedure
[1] Confirm whether the machine can start up using the Flash ROM which has been
installed in the machine.
[2] The machine is in the Sim26-44 mode.
In this Sim26-44, set the channel (A channel) where the SCSI cable will be connected to “1”
(SC PRINTER).
* If the ARPB2 printer kit has already been used, since the channel setting has already
been completed, the above operation is not necessary. That is, the channel where the
printer kit has already been connected automatically becomes a channel for the SCSI
cable.
* If the version of the ICU ROM installed in the AR280/285/335is 2.xx, setting the Sim26-
44 is not necessary.
[3] Turn off the power and remove the cabinet of the Copier.
•
Remove the rear cabinet, the flywheel, and the shield line guide.
•
Remove the glass holder right, the table glass, and the dark box cover.
•
Open the front cabinet , and remove the ROM cover from the frame cover A.
•
When rewrite the flash ROM, can be operate without flash ROM PWB on the OPE PWB
and PCU PWB.
*1) When the flash ROM is rewritten using the ROM writer function described above, it is
essential that the flash ROM (program) of the ICU PWB is loaded to ICU PWB socket-1.
The targeted ROM is loaded to socket-2.
ARE160
Sharp Electronics (UK) Ltd., Technical Services Group
*2) If the ICU ROM installed in the ROM Writer is version 3.xx for the AR280/285/335 or
any version for the AR250/286/336/405,the OPE and PCU ROMs need not be installed on
the machine when the program data is written to the flash ROM, and the versions of the
OPE and PCU ROMs can be upgraded separately. If the ICU ROM installed in the ROM
Writer is version 2.xx for the AR280/285/335, the OPE and PCU ROMs should be installed
on the machine when the program data is written to the flash ROM. Therefore, be sure to
upgrade the ICU ROM version first, and then upgrade the versions of the OPE and PCU
ROMs using the upgraded ICU ROM.
[4] Using a SCSI cable, connect the PC and the SCSI connector (channel A) set in the Sim
26-44 above. (Cable length: Max. 1m)
Connector configurations corresponding to channel A are shown below.
[5] Install the flash ROM to be written to the Dimm socket (SOCKET-2)of the ICU PWB.
(a) OPE ROM: LH28F016SUT ´ 1
(b) PCU ROM: LH28F008SUT ´ 1
(c) ICU ROM: LH28F008SUT ´ 2 (2MB)
[6] Turn on the power of the Copier.
[7] Turn on the power of the personal computer.
[8] When the personal computer is started, the Copier is recognised as the SCSI unit by
the SCSI host adapter.
* If an “Unknown Device” message is displayed in Windows, click on [Cancel] and
proceed with the operation to its completion. (The computer has recognised the machine
as an unknown device.)
[9] Copy the flash ROM writing program and the data file to be written into the flash ROM to
the same directory.
•
Flash ROM writing program: FLASH4.EXE (Windows program)
•
ICU program:
ICUxxxx.MOT (xxxx = Version No.)
ICU file data:
ICUxxxx.FD
(xxxx = Version No.)
•
PCU program:
PCUxxxx.MOT (xxxx = Version No.)
PCU file data:
PCUxxxx.FD
(xxxx = Version No.)
•
OPE program:
OPExxxx.MOT (xxxx = Version No.)
OPE file data:
OPExxxx.FD
(xxxx = Version No.)
Please note that the ROM program data (xxx.MOT) and the file data (xxx.FD) provided for
FLASH2 cannot be used for FLASH4.
ARE160
Sharp Electronics (UK) Ltd., Technical Services Group
[10]When FLASH4.EXE is executed the following display is shown.
[11]Select the type of the flash ROM to be written and click the Translate button.
Data transfer is started from the personal computer to the ICU PWB.
[12]After completionof data transfer, writing to the flash ROM is started in the ICU PWB.
[13]When writing to the flash ROM is normally completed,the following display is shown.
ARE160
Sharp Electronics (UK) Ltd., Technical Services Group
Page of 6
Display

Download Sharp AR-335 (serv.man131) Technical Bulletin

Here you can read online and download Sharp AR-335 (serv.man131) Technical Bulletin in PDF. AR-335 (serv.man131) technical bulletin will guide through the process and help you recover, restore, fix, disassemble and repair Sharp AR-335 (serv.man131) Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.