AR-286 (serv.man10). AR286,336 Operation Manual-Section 4 - Sharp Copying Equipment User Guide / Operation Manual. Page 3

The copier has two different finisher modes: one sorts copies into
sets matching the sequence of the originals and the second groups
copies by original. When the optional finisher (AR-FN1N) is in-
stalled, the copier can automatically staple the sorted copies. Each
collated set of copies or group of copies can be stacked offset from
the previous set.

Tray capacity

Top tray:

500 sheets

Second tray: 500 sheets
Offset tray:

1,500 sheets (A4 (8-1/2" x 11"))
750 sheets (larger than A4 (8-1/2" x 11"))

Paper size

Top tray:

A6 to A3 (5-1/2" x 8-1/2" to 11" x 17")

Second tray: A5 to A3 (5-1/2" x 8-1/2" to 11" x 17")
Offset tray:

A4 to A3 (8-1/2" x 11" to 11" x 17")

Paper weight

Top tray:

52 to 128 

g

/m

2

 (14 lbs. to 34 lbs.) (when face up)

64 to 105 

g

/m

2 

(17 lbs. to 28 lbs.)  (when face down)

Second tray: 64 to 105 

g

/m

2

 (17 lbs. to 28 lbs.)

Offset tray:

64 to 128 

g

/m

2

 (17 lbs. to 34 lbs.) (when face up)

64 to 105 

g

/m

2

 (17 lbs. to 28 lbs.) (when face down)

For paper weighing more than 105 

g

/m

2

 (28 lbs.), A4

(8-1/2" x 11") is the maximum size.

Offset

30 mm (1.2 inch)

Paper size

A4, A4R, B4, A3 (8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", 11" x 17")

for stapling

In some regions, 216 mm x 330 mm (8-1/2" x 13")
size paper can be used in place of B4 (8-1/2" x 14").

Stapling capacity

50 sheets (80 

g

/m

2 

(21 lbs.))

(25 sheets for B4 and A3 (8-1/2" x 14" and 11" x 17") paper)

Power supply

Drawn from the copier

Weight

Approx. 50 k

g

 (111 lbs.)

Dimensions

590 mm (W) x 560 mm (D) x  998 mm (H)

(23-15/64"(W) x 22-1/16"(D) x  39-19/64"(H))

Specifications are subject to change for improvement without notice.

Finisher (AR-FN1N)

Finisher release lever

Top tray

Second tray 
(not used in the copy mode)

Stapler unit

Paper transport area cover

Paper feed area cover

Top cover

Offset tray

When copying onto size 11” x 17” 
paper, lower the metal support 
located at the tip of the offset tray.

●

The top tray and second tray are each furnished with an extendable component, which is to be used when copying
onto size A3 (11” x 17”) paper.