Read Sharp AR-280 (serv.man9) Service Manual online
Push the electrode cleaner onto the electrode tip so that the elec-
trode tip comes into the electrode cleaner to clean. (repeat two or
three times.)
trode tip comes into the electrode cleaner to clean. (repeat two or
three times.)
Note:
•
Do not move the electrode cleaner with the electrode tip
in it.
in it.
•
When cleaning, clean all the electrodes evenly.
Install the electrode to the original position and fix with the fixing
screw (1 pc.).
screw (1 pc.).
Insert the main charger unit completely into the copier along the
guide groove.
guide groove.
•
Transfer/separation charger unit wire cleaning
Slightly lift the transport section open/close lever and tilt it to the
right.
right.
Remove the driver transfer separation charger fixing screw, and
remove the transfer/separation charger unit from the copier body.
remove the transfer/separation charger unit from the copier body.
Remove the separation charger guide from the charger case.
Squeeze the transfer/separation charger wire with the charger
cleaner, and move it in the direction of the arrow which is indi-
cated on the charger to clean.
cleaner, and move it in the direction of the arrow which is indi-
cated on the charger to clean.
Install the separation charger to the charger case, and insert the
transfer/separation charger unit along the guide groove com-
pletely to the bottom.
transfer/separation charger unit along the guide groove com-
pletely to the bottom.
Then, tighten the transfer/separation charger fixing screw, return
the transport section open/close lever to the left, and close the
front cabinet.
the transport section open/close lever to the left, and close the
front cabinet.
Electromagnetic
cleaner
cleaner
Electromagnetic
section
section
5 – 4
Click on the first or last page to see other AR-280 (serv.man9) service manuals if exist.