Read Sharp AR-280 (serv.man132) Technical Bulletin online
2. Measure to establish uniformity of the high voltage PWB to improve
productivity.
1.Model Name:
AR280/285/335
2.General:
A change has been carried out in the high voltage PWB used in the models listed above.
The new high voltage PWB is the same one which is used in model AR405.
This action has been carried out as a measure to establish uniformity of the models listed
above with model AR405. It is important to note that both the old parts and the new parts
can be used in the models listed above.
The new high voltage PWB is the same one which is used in model AR405.
This action has been carried out as a measure to establish uniformity of the models listed
above with model AR405. It is important to note that both the old parts and the new parts
can be used in the models listed above.
3.Action:
From the 1st lot of February 1999 production.
3. Parts change carried out in accordance with a change to in-house production
of the LSU unit.
1.Model Name:
AR280/285/335
2.General:
A change in the part code of the LSU unit has been carried out in accordance with the in-
house manufacturing of the unit.
house manufacturing of the unit.
3.Action:
Model AR285 (only for machines bound for the US market destinations):
From the 1st lot of February 1999 production.
For all units other than the one listed above:
From the 1st lot of March 1999 production.
4. Measure to establish uniformity of the PCU PWB ( to improve productivity).
1.Model Name:
AR405
2.General:
The PCU PWB which is in accordance with noise standards (for the 200 V series) had been
established, but in accordance with the loosening of the noise standards, the PCU PWB
which is in accordance with the old standards has been discontinued, and the PCU PWB
used with other machines is now being used in the model listed above.
established, but in accordance with the loosening of the noise standards, the PCU PWB
which is in accordance with the old standards has been discontinued, and the PCU PWB
used with other machines is now being used in the model listed above.
3.Action:
From the 1st lot of February 1999 production.
5. Measure to alleviate problems of scattering of the waste toner.
1.Model Name:
AR405
2.General:
A mylar sheet and a molt have been added. This action has been carried out as a measure
to alleviate problems of scattering of the waste toner. Please refer to the attached
supplementary document for details concerning the attachment locations of these new
parts. Insert the following figure here.
to alleviate problems of scattering of the waste toner. Please refer to the attached
supplementary document for details concerning the attachment locations of these new
parts. Insert the following figure here.
ARE154
Sharp Electronics (UK) Ltd., Technical Services Group
Click on the first or last page to see other AR-280 (serv.man132) service manuals if exist.