AR-280 (serv.man132). 1.Parts Change To Incorporate Parts Manufactured By Sharp Into Assembled Units (Productivity Improvement). 2.Measure To Establish Uniformity Of The High Voltage PWB (To Improve Productivity). 3.Parts Change Carried Out In Accordance With A Change To In-house Production Of The LSU Unit. 4.Measure To Establish Uniformity Of The PCU PWB To Improve Productivity. 5.Measure To Alleviate Problems Of Scattering Of The Waste Toner. (WHITE) - Sharp Copying Equipment Technical Bulletin (repair manual)

ar-280 (serv.man132) technical bulletin
Model
AR-280 (serv.man132)
Pages
4 Few pages! See other manuals at the bottom of the first or last page.
Size
121.28 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
Copying Equipment / 1.Parts Change To Incorporate Parts Manufactured By Sharp Into Assembled Units (Productivity Improvement). 2.Measure To Establish Uniformity Of The High Voltage PWB (To Improve Productivity). 3.Parts Change Carried Out In Accordance With A Change To In-house Production Of The LSU Unit. 4.Measure To Establish Uniformity Of The PCU PWB To Improve Productivity. 5.Measure To Alleviate Problems Of Scattering Of The Waste Toner. (WHITE)
File
ar-280-sm132.pdf
Date

Read Sharp AR-280 (serv.man132) Technical Bulletin online

1.
PARTS CHANGE TO INCORPORATE PARTS MANUFACTURED BY
SHARP INTO ASSEMBLED UNITS (PRODUCTIVITY IMPROVEMENT).
2.
MEASURE TO ESTABLISH UNIFORMITY OF THE HIGH VOLTAGE PWB
(TO IMPROVE PRODUCTIVITY).
3.
ARTS CHANGE CARRIED OUT IN ACCORDANCE WITH A CHANGE TO IN-
HOUSE PRODUCTION OF THE LSU UNIT.
4.
MEASURE TO ESTABLISH UNIFORMITY OF THE PCU PWB TO
IMPROVE PRODUCTIVITY.
5.
MEASURE TO ALLEVIATE PROBLEMS OF SCATTERING OF THE
WASTE TONER.
1. Parts change to incorporate parts manufactured by Sharp into assembled
units (productivity improvement).
1.Model Name:
AR280/285/335
2.General:
A change in some of the parts has been carried out in accordance with the incorporation of
an LSU unit and copy lamp unit which have been manufactured in-house.
3.Description:
Part name
Old
New
1
Wire fixing plate
LPLTM5434FCZZ
LPLTM5434FCZ1 Carried out as a measure to establish uniformity
between model ARS400 and model ARS405.
2
LSU Harness cover
PCOVP1455FCZZ PCOVP1513FCZZ Carried out as a measure to establish uniformity
between model ARS400 and model ARS405.
3
LSU Interface harness
(Japan market)
DHAI-2945FCZZ
DHAI-2945FC11
Change carried out in the length of the harness
and change carried out in the colour of the
distinguishing tape (red has been changed to
yellow).
4
LSU Interface harness
(overseas market)
DHAI-2865FCZZ
DHAI-2865FC11
Change carried out in the length of the harness
and change carried out in the colour of the
distinguishing tape (black has been changed to
blue).
It is possible to use the new part described in 1 above with either the old copy lamp units or
with the new ones, but the old parts can only be used with the old copy lamp units. The
same true for the new part described in 2 above.
The new parts described in both 3 and 4 above are not interchangeable with the
corresponding old parts.
4.Action:
From the 1st lot of February 1999 production.
ARE154
Sharp Electronics (UK) Ltd., Technical Services Group
Date:
15 October 1999
Model:
AR280/285/335
Ref:
043
Colour: White
Page:
1 of 4
TECHNICAL BULLETIN
2. Measure to establish uniformity of the high voltage PWB to improve
productivity.
1.Model Name:
AR280/285/335
2.General:
A change has been carried out in the high voltage PWB used in the models listed above.
The new high voltage PWB is the same one which is used in model AR405.
This action has been carried out as a measure to establish uniformity of the models listed
above with model AR405. It is important to note that both the old parts and the new parts
can be used in the models listed above.
3.Action:
From the 1st lot of February 1999 production.
3. Parts change carried out in accordance with a change to in-house production
of the LSU unit.
1.Model Name:
AR280/285/335
2.General:
A change in the part code of the LSU unit has been carried out in accordance with the in-
house manufacturing of the unit.
3.Action:
Model AR285 (only for machines bound for the US market destinations):
From the 1st lot of February 1999 production.
For all units other than the one listed above:
From the 1st lot of March 1999 production.
4. Measure to establish uniformity of the PCU PWB ( to improve productivity).
1.Model Name:
AR405
2.General:
The PCU PWB which is in accordance with noise standards (for the 200 V series) had been
established, but in accordance with the loosening of the noise standards, the PCU PWB
which is in accordance with the old standards has been discontinued, and the PCU PWB
used with other machines is now being used in the model listed above.
3.Action:
From the 1st lot of February 1999 production.
5. Measure to alleviate problems of scattering of the waste toner.
1.Model Name:
AR405
2.General:
A mylar sheet and a molt have been added. This action has been carried out as a measure
to alleviate problems of scattering of the waste toner. Please refer to the attached
supplementary document for details concerning the attachment locations of these new
parts. Insert the following figure here.
ARE154
Sharp Electronics (UK) Ltd., Technical Services Group
ARE154
Sharp Electronics (UK) Ltd., Technical Services Group
Attachment standard for
the side mylar sheet.
Attachment standard for
the side mylar sheet.
Waste toner transport pipe
After the assembly process has been completed,
the shutter should open and close smoothly.
Side mylar
Moveable shutter
Side mylar
Alignment with the
attachment standard.
Side molt
Moveable shutter
Attachment standard
for the side molt
Attachment
standard line
Side molt
Attachment standard
for the side molt
Attachment
standard line
Care should be exercised to insure that no sagging
or tears occur during attachment operations.
!
3.Action:
From mid-December 1998 production.
Ref.
No.
Model
name
Version
P/G No.
Current parts
New parts
Parts name
Effec-
tive
time
Inter-
change-
ability
Note
Parts code
Parts code
Price
rank
1
AR280
AR285
AR335
All
6 -5
LPLTM5434FCZZ
LPLTM5434FCZ1
AC
Wire fixing plate
1st lot
'99/2
3
5 -30
PCOVP1455FCZZ PCOVP1513FCZZ AG
LSU harness cover
5 -31
DHAI-2865FCZZ
DHAI-2865FC11
AS
LSU interface harness
4
2
10 -36
RTRNZ0533FCZZ RTRNZ0533FCZ1
BT
High voltage PWB
1
3
AR285
U.S.A.
9 -501
DUNT-6984FC11
DUNT-6984FC22
CL
LSU unit
AR280
AR285
AR335
*
1st lot
'99/3
4
AR405
10 -12
CPWBN1403FC51 CPWBN1267FC53 CB
PCU PWB
1st lot
'99/2
41 -901
<Interchange>
1. Interchangeable.
4. Not interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
5. Interchangeable if replaced with same types of
related parts in use.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
6. Others.
Parts marked with “
” is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
ARE154
Sharp Electronics (UK) Ltd., Technical Services Group
Waste toner transport pipe
Drop opening mylar sheet
Waste toner transport pipe
Attachment standard for the
drop opening mylar sheet
Drop opening mylar sheet
Attachment standard for the
drop opening mylar sheet
Attachment
standard line
Attachment
standard line
Page of 4
Display

Download Sharp AR-280 (serv.man132) Technical Bulletin

Here you can read online and download Sharp AR-280 (serv.man132) Technical Bulletin in PDF. AR-280 (serv.man132) technical bulletin will guide through the process and help you recover, restore, fix, disassemble and repair Sharp AR-280 (serv.man132) Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.