Read Sharp AR-275 (serv.man35) User Guide / Operation Manual online
16
GE
T
T
IN
G
S
T
T
ARTE
D
POWER ON AND OFF
The power switch is located on the left side of the copier.
Power on
Turn the power switch to the "ON" position.
●
When the power switch is turned to the "ON" position, the message "System check." will appear in the
message display and warm-up will start. During warm-up, you can select your desired job settings
and then by pressing the START (
message display and warm-up will start. During warm-up, you can select your desired job settings
and then by pressing the START (
) key, your job will commence when the copier comes to "Ready
to copy.". Once the copier has finished warming up, the message display will change to "Ready to
copy.", and the START (
copy.", and the START (
) key indicator will light up, indicating that copying is possible.
●
If the copier has been programmed in the auditing mode, the message "Enter your account number."
will appear after warming up. Once a valid account number has been entered, the message display
will change to "Ready to copy." and copying will be possible. See page 20.
will appear after warming up. Once a valid account number has been entered, the message display
will change to "Ready to copy." and copying will be possible. See page 20.
Power off
When the copier is not used for a long time, be sure to turn it off.
Ensure that the machine is not operating and then turn the power switch to the "OFF" position.
Ensure that the machine is not operating and then turn the power switch to the "OFF" position.
If the power switch is turned off while the machine is operating, a misfeed may occur. Also the job that
was in progress will be totally cancelled.
was in progress will be totally cancelled.
Power on
Power off
Cover1_2SUK.book 16 ページ ２００１年５月２４日 木曜日 午後８時５５分
Click on the first or last page to see other AR-275 (serv.man35) service manuals if exist.