Read Sharp AR-275 (serv.man35) User Guide / Operation Manual online
COPIER INSTALLATION
9
1
GE
T
T
IN
G
S
T
T
ARTE
D
Be sure to connect the power cord only to a power outlet that meets the specified
voltage and current requirements (See page 89.). Also make certain the outlet is
properly grounded.
voltage and current requirements (See page 89.). Also make certain the outlet is
properly grounded.
●
For this copier's power supply requirements, see the name plate located on the back of the unit.
NOTE:
Connect the copier to a power outlet which is not used for other electric appliances. If a lighting
fixture is connected to the same outlet, the light may flicker.
Connect the copier to a power outlet which is not used for other electric appliances. If a lighting
fixture is connected to the same outlet, the light may flicker.
Be sure to allow the required space around the machine for servicing and proper
ventilation.
ventilation.
A small amount of ozone is produced within the copier during operation. The
emission level is insufficient to cause any health hazard.
emission level is insufficient to cause any health hazard.
NOTE:
The present recommended long term exposure limit for ozone is 0.1 ppm
(0.2 mg/m
The present recommended long term exposure limit for ozone is 0.1 ppm
(0.2 mg/m
3
) calculated as an 8 hr. time-weighted average concentration.
However, since the small amount that is emitted may have an objectionable
odor, it is advisable to place the copier in a ventilated area.
odor, it is advisable to place the copier in a ventilated area.
30 cm (12")
Cover1_2SUK.book 9 ページ 2001年5月24日 木曜日 午後8時55分
Click on the first or last page to see other AR-275 (serv.man35) service manuals if exist.