Read Sharp AR-275 (serv.man144) Technical Bulletin online
DCE232
Sharp Electronics (UK) Ltd., Technical Services Group
5)
When removing the screw 1 in the figure below ((2) Upper 500-sheet tray paper
feed), use a screw driver the whole length of which is 5cm or less and the iron tip
of which is 3.5cm or less.
feed), use a screw driver the whole length of which is 5cm or less and the iron tip
of which is 3.5cm or less.
6)
The shape of the manual feed silencer plate and its attachment reference are
changed as below:
changed as below:
7)
When executing the sub scan magnification ratio automatic adjustment (SIM48-
3), keep the side cover open.
3), keep the side cover open.
8)
Illustrations in (1) OC image edge position / Sub scanning magnification ratio in
"B. Mechanism section" of [7] ADJUSTMENTS, SETTING are changed. (See
below)
"B. Mechanism section" of [7] ADJUSTMENTS, SETTING are changed. (See
below)
9)
Items (3), (4), and (5) of "A. Process section in [7] ADJUSTMENTS, SETTING
are changed as follows:
are changed as follows:
Default
Item
Display item
Current
After change
(3)
1:AE
426 (-426V)
400 (-400V)
(4)
1:AE
4 (-555V)
3 (-530V)
(5)
1:AE
4 (-426V)
3 (-400V)
Click on the first or last page to see other AR-275 (serv.man144) service manuals if exist.