AR-250 (serv.man2). AR250 Specifications - Sharp Copying Equipment Specification (repair manual). Page 2

Read Sharp AR-250 (serv.man2) Specification online

No.
AR-280/285/335
AR-250/281/286/336
Page
Section
Content
Change
Remark
8-51
[8]-2-C
43 -1   Operation/Procedure
Change
Table
8-55
[8]-2-C
44 -15   Operation/Procedure
Change
GIRD BIAS:
    Main charger grid voltage (Equivalent to 
    SIM 8-2 for drum type B.) (475)
GRID BIAS:
    Main charger grid voltage (Equivalent to 
    SIM 8-2 for drum type B.) (500)
9-3
~
9-27
[9]-3
Details of maintenance
Change
The cycle in the table is same as that of the
AR-335, and the illustration is same as that of
the AR-405.
10-5
[10]-5-C Copy lamp
Change
Refer to AR-405
Service Manual.
The change content is same as AR-405.
10-6
[10]-7
Laser unit
Change
Refer to AR-405
Service Manual.
The change content is same as AR-405.
12-2
[12]-3-B
(3) Laser beam power correction 1
I
llust
Value change
 0.2mW (max)                           
 Laser beam power correction value (
LPc1)
 0.12mW (max)                           
 Laser beam power correction value (
LPc1)
(4) Main charger grid voltage correction 1
I
llust
Value change
95v
Main charger grid voltage correction value
48v
Main charger grid voltage correction value
12-3
[12]-3-B
(5) Developing bias voltage correction
a. Outline and purpose
Value change
2)  Connect the three points of three toner patch
density points with strait lines, and check that
it reaches the reference density "38" (set with
SIM 44-4).
If the above condition is satisfied, obtain the
correction developing bias voltage (Vdbc(n))
for the reference density "38" by linear
approximation.
2)  Connect the three points of three toner patch
density points with strait lines, and check that
it reaches the reference density "58" (set with
SIM 44-15).
If the above condition is satisfied, obtain the
correction developing bias voltage (Vdbc(n))
for the reference density "58" by linear
approximation.
Destination
Pre-heat mode fusing temperature set value
MODEL
AR-250
AR-230/280/285
series
AR-2X1/2X6/3X1
series
AR-330/335
series
AR-3X6 series
AR-4XX series
U.S.A. (Inch)
120
125
130
140
Canada (Inch)
120
125
130
140
Other (Inch)
120
125
130
140
Japan
130
130
140
Other (AB)
120
125
130
140
Europe (AB)
105
110
130
140
U.K. (AB)
105
110
130
140
Aus. (AB)
105
110
130
140
AR-336
– 2 –
4/8/1999
Page of 2
Display

Download Sharp AR-250 (serv.man2) Specification