Read Sharp AR-206 (serv.man4) Service Manual online
C. Copy lamp
D. Lens unit
Note: Do not remove screws which are not indicated in the figure. If
the height of the base plate is changed, it cannot be adjusted
in the market.
in the market.
Lens unit attachment reference
( 3 )
( 1 )
( 1 )
( 2 )
Attach the lens unit so that the lens unit number on the lens
adjustment plate is aligned with the scribe line on the base plate.
adjustment plate is aligned with the scribe line on the base plate.
Example: Lens unit number –2.8
Attach the lens unit at 2 scales in the paper exit direc-
tion from the reference line.
tion from the reference line.
Note: Never touch the other screws than the unit attachment
screw.
The lens unit is supplied only in a whole unit.
The lens unit is supplied only in a whole unit.
3. Fusing section
No.
Contents
A
Fusing unit
B
Thermostat
C
Thermistor
D
Heater lamp
E
Upper heat roller
F
Separation pawl
G
Lower heat roller
A. Fusing unit removal
B. Thermostat
(2)
(3)
(1)
(1)
( 2 )
( 3 )
( 1 )
( 1 )
AR-162 [11] DISASSEMBLY AND ASSEMBLY 10/5/2000
AR-162 DISASSEMBLY AND ASSEMBLY – 2
Click on the first or last page to see other AR-206 (serv.man4) service manuals if exist.