AR-205 (serv.man27). AR205 Operation Manual-Section 2 - Sharp Copying Equipment User Guide / Operation Manual. Page 8

Remove the paper on or under the job separator
tray so that it can move to the proper position,
and then open and close the side cover.

Wait  until the printing job will finish.

The TD cartridge is not installed. Install the
TD cartridge.

Side cover(s) is open.
Close the front and side covers securely.

The TD cartridge must be replaced. See page
28, TD CARTRIDGE REPLACEMENT.

A misfeed has occurred. See page 32,
MISFEED REMOVAL.

Connect the copier to a power outlet which
is not used for other electric appliances.

●

Is the output tray full (

) indicator

on and any misfeed location (

)

indicator blinking while the misfeed
(

) indicator is not blinking?

●

Is two-sided printing being
performed?

●

Is 

 blinking in the copy

quantity display?

●

Is 

 steadily lit in the copy

quantity display?

●

Is the 

 indicator blinking?

●

Is the 

 indicator blinking?

●

Is the same power outlet used for
the lighting fixture and the copier?

Power is on but copying
is not possible.

Lighting fixture flickers.

Copier trouble?

An automatic self-diagnostic function is built into the copier. Should the
copier malfunction, the self-diagnostic function will locate the problem and
stop the copier to prevent damage. An alphanumeric code will appear in the
copy quantity display.

Should the copier completely stop and a letter and a number appear alternately,
contact your SHARP service centre immediately.

Be sure to use only genuine SHARP parts and supplies.

Please contact your SHARP service centre immediately if a problem persists
after checking the above.