Read Sharp AR-205 (serv.man14) Service Manual online
Lens unit attachment reference
Attach the lens unit so that the lens unit number on the lens
adjustment plate is aligned with the scribe line on the base plate.
adjustment plate is aligned with the scribe line on the base plate.
Example: Lens unit number –2.8
Attach the lens unit at 2 scales in the paper exit direc-
tion from the reference line.
tion from the reference line.
Note: Never touch the other screws than the unit attachment
screw.
The lens unit is supplied only in a whole unit.
The lens unit is supplied only in a whole unit.
3. Fusing section
No.
Contents
A
Fusing unit
B
Thermostat
C
Thermistor
D
Heater lamp
E
Upper heat roller
F
Separation pawl
G
Lower heat roller
A. Fusing unit removal
( 2 )
( 3 )
( 1 )
( 1 )
B. Thermostat
C. Thermistor
Installation: Check that the thermistor is in contact with the upper
heat roller.
D. Heater lamp
Assembly: Insert the spring (A) into the hole (B) in the fusing frame.
( 2 )
( 3 )
( 1 )
( 1 )
( 2 )
( 1 )
(A)
(B)
(2)
(1) (2)
AR-205 [11] DISASSEMBLY AND ASSEMBLY 05/24/1999
AR-205
11 – 3
Click on the first or last page to see other AR-205 (serv.man14) service manuals if exist.